Literature DB >> 20490939

Evidence-based approach to the maintenance of laboratory and medical equipment in resource-poor settings.

Robert Malkin, Allison Keane.   

Abstract

Much of the laboratory and medical equipment in resource-poor settings is out-of-service. The most commonly cited reasons are (1) a lack of spare parts and (2) a lack of highly trained technicians. However, there is little data to support these hypotheses, or to generate evidence-based solutions to the problem. We studied 2,849 equipment-repair requests (of which 2,529 were out-of-service medical equipment) from 60 resource-poor hospitals located in 11 nations in Africa, Europe, Asia, and Central America. Each piece of equipment was analyzed by an engineer or an engineering student and a repair was attempted using only locally available materials. If the piece was placed back into service, we assumed that the engineer's problem analysis was correct. A total of 1,821 pieces of medical equipment were placed back into service, or 72%, without requiring the use of imported spare parts. Of those pieces repaired, 1,704 were sufficiently documented to determine what knowledge was required to place the equipment back into service. We found that six domains of knowledge were required to accomplish 99% of the repairs: electrical (18%), mechanical (18%), power supply (14%), plumbing (19%), motors (5%), and installation or user training (25%). A further analysis of the domains shows that 66% of the out-of-service equipment was placed back into service using only 107 skills covering basic knowledge in each domain; far less knowledge than that required of a biomedical engineer or biomedical engineering technician. We conclude that a great majority of laboratory and medical equipment can be put back into service without importing spare parts and using only basic knowledge. Capacity building in resource-poor settings should first focus on a limited set of knowledge; a body of knowledge that we call the biomedical technician's assistant (BTA). This data set suggests that a supported BTA could place 66% of the out-of-service laboratory and medical equipment in their hospital back into service.

Entities:  

Mesh:

Year:  2010        PMID: 20490939     DOI: 10.1007/s11517-010-0630-1

Source DB:  PubMed          Journal:  Med Biol Eng Comput        ISSN: 0140-0118            Impact factor:   2.602


  1 in total

Review 1.  Design of health care technologies for the developing world.

Authors:  Robert A Malkin
Journal:  Annu Rev Biomed Eng       Date:  2007       Impact factor: 9.590

  1 in total
  13 in total

1.  Editorial comment on Malkin and Keane (2010).

Authors:  Herbert F Voigt; Shankar M Krishnan
Journal:  Med Biol Eng Comput       Date:  2010-05-27       Impact factor: 2.602

2.  Effectiveness of medical equipment donations to improve health systems: how much medical equipment is broken in the developing world?

Authors:  Lora Perry; Robert Malkin
Journal:  Med Biol Eng Comput       Date:  2011-05-20       Impact factor: 2.602

3.  Responding to maternal, neonatal and child health equipment needs in Kenya: a model for an innovation ecosystem leveraging on collaborations and partnerships.

Authors:  Richard Ayah; John Ong'ech; Edwin Maina Mbugua; Rose Chepchumba Kosgei; Katie Waller; David Gathara
Journal:  BMJ Innov       Date:  2020-04-24

Review 4.  Inpatient mortality of HIV-infected adults in sub-Saharan Africa and possible interventions: a mixed methods review.

Authors:  Bahati Mk Wajanga; Lauren E Webster; Robert N Peck; Jennifer A Downs; Kedar Mate; Luke R Smart; Daniel W Fitzgerald
Journal:  BMC Health Serv Res       Date:  2014-12-03       Impact factor: 2.655

5.  Availability and utilization of medical devices in Jimma zone hospitals, Southwest Ethiopia: a case study.

Authors:  Beyene Wondafrash Ademe; Bosena Tebeje; Ashagre Molla
Journal:  BMC Health Serv Res       Date:  2016-07-19       Impact factor: 2.655

Review 6.  Global Surgery 2030: a roadmap for high income country actors.

Authors:  Joshua S Ng-Kamstra; Sarah L M Greenberg; Fizan Abdullah; Vanda Amado; Geoffrey A Anderson; Matchecane Cossa; Ainhoa Costas-Chavarri; Justine Davies; Haile T Debas; George S M Dyer; Sarnai Erdene; Paul E Farmer; Amber Gaumnitz; Lars Hagander; Adil Haider; Andrew J M Leather; Yihan Lin; Robert Marten; Jeffrey T Marvin; Craig D McClain; John G Meara; Mira Meheš; Charles Mock; Swagoto Mukhopadhyay; Sergelen Orgoi; Timothy Prestero; Raymond R Price; Nakul P Raykar; Johanna N Riesel; Robert Riviello; Stephen M Rudy; Saurabh Saluja; Richard Sullivan; John L Tarpley; Robert H Taylor; Louis-Franck Telemaque; Gabriel Toma; Asha Varghese; Melanie Walker; Gavin Yamey; Mark G Shrime
Journal:  BMJ Glob Health       Date:  2016-04-06

7.  Design and preliminary validation of a mobile application-based expert system to facilitate repair of medical equipment in resource-limited health settings.

Authors:  Alison L Wong; Kelly M Lacob; Madeline G Wilson; Stacie M Zwolski; Soumyadipta Acharya
Journal:  Med Devices (Auckl)       Date:  2018-05-16

8.  Failure Analysis for Ultrasound Machines in a Radiology Department after Implementation of Predictive Maintenance Method.

Authors:  Greg Chu; Vivian Li; Amy Hui; Christina Lam; Eva Chan; Martin Law; Lawrance Yip; Wendy Lam
Journal:  J Med Ultrasound       Date:  2018-03-28

9.  The Effect of Chemical Cleaning on Mechanical Properties of Three-Dimensional Printed Polylactic Acid.

Authors:  Julie C Fleischer; Jan C Diehl; Linda S G L Wauben; Jenny Dankelman
Journal:  J Med Device       Date:  2020-02-11       Impact factor: 0.582

10.  Evaluation of a large-scale donation of Lifebox pulse oximeters to non-physician anaesthetists in Uganda.

Authors:  L C Finch; R Y Kim; S Ttendo; J K Kiwanuka; I A Walker; I H Wilson; T G Weiser; W R Berry; A A Gawande
Journal:  Anaesthesia       Date:  2014-05       Impact factor: 6.955

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.