Determination of trace heavy metals in herbs by sequential injection analysis-anodic stripping voltammetry using screen-printed carbon nanotubes electrodes.

A method for the simultaneous determination of Pb(II), Cd(II), and Zn(II) at low microg L(-1) concentration levels by sequential injection analysis-anodic stripping voltammetry (SIA-ASV) using screen-printed carbon nanotubes electrodes (SPCNTE) was developed. A bismuth film was prepared by in situ plating of bismuth on the screen-printed carbon nanotubes electrode. Operational parameters such as ratio of carbon nanotubes to carbon ink, bismuth concentration, deposition time and flow rate during preconcentration step were optimized. Under the optimal conditions, the linear ranges were found to be 2-100 microg L(-1) for Pb(II) and Cd(II), and 12-100 microg L(-1) for Zn(II). The limits of detection (S(bl)/S=3) were 0.2 microg L(-1) for Pb(II), 0.8 microg L(-1) for Cd(II) and 11 microg L(-1) for Zn(II). The measurement frequency was found to be 10-15 stripping cycle h(-1). The present method offers high sensitivity and high throughput for on-line monitoring of trace heavy metals. The practical utility of our method was also demonstrated with the determination of Pb(II), Cd(II), and Zn(II) by spiking procedure in herb samples. Our methodology produced results that were correlated with ICP-AES data. Therefore, we propose a method that can be used for the automatic and sensitive evaluation of heavy metals contaminated in herb items. Copyright 2010 Elsevier B.V. All rights reserved.