Literature DB >> 20444642

ATR-FTIR studies on ion interaction of lithium perchlorate in polyacrylate/poly(ethylene oxide) blends.

L H Sim1, S N Gan, C H Chan, R Yahya.   

Abstract

The interaction behaviours between components of polyacrylate (PAc)/poly(ethylene oxide) (PEO) and lithium perchlorate (LiClO(4)) were investigated in detail by Attenuated Total Reflectance (ATR)-Fourier Transformed Infrared (FTIR) spectroscopy. Solution cast films of the PAc/PEO and PAc/PEO/LiClO(4) were examined. No obvious shifting of the characteristic ether and ester group stretching modes of PEO and PAc was observed, indicating incompatibility of the binary PAc/PEO blend. The spectroscopic studies on the PAc/PEO/LiClO(4) blends reveal that Li(+) ions coordinate individually to the polymer components at the ether oxygen of PEO and the C-O of the ester group of PAc. Frequency changes observed on the nu(C-O-C) and omega(CH(2)) of PEO confirm the coordination between PEO and Li(+) ions resulting in crystallinity suppression of PEO. The absence of experimental evidence on the formation of PEO-Li(+)-PAc complexes suggests that LiClO(4) does not enhance the compatibility of PAc/PEO blend. Copyright 2010 Elsevier B.V. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 20444642     DOI: 10.1016/j.saa.2009.09.031

Source DB:  PubMed          Journal:  Spectrochim Acta A Mol Biomol Spectrosc        ISSN: 1386-1425            Impact factor:   4.098


  6 in total

1.  3D-printed implantable devices with biodegradable rate-controlling membrane for sustained delivery of hydrophobic drugs.

Authors:  Camila J Picco; Juan Domínguez-Robles; Emilia Utomo; Alejandro J Paredes; Fabiana Volpe-Zanutto; Dessislava Malinova; Ryan F Donnelly; Eneko Larrañeta
Journal:  Drug Deliv       Date:  2022-12       Impact factor: 6.419

2.  Structural Peculiarities of Ion-Conductive Organic-Inorganic Polymer Composites Based on Aliphatic Epoxy Resin and Salt of Lithium Perchlorate.

Authors:  Liubov Matkovska; Maksym Iurzhenko; Yevgen Mamunya; Igor Tkachenko; Valeriy Demchenko; Volodymyr Synyuk; Andriy Shadrin; Gisele Boiteux
Journal:  Nanoscale Res Lett       Date:  2017-06-20       Impact factor: 4.703

3.  Hydrogen Bonding-Induced Assembled Structures and Photoresponsive Behavior of Azobenzene Molecule/Polyethylene Glycol Complexes.

Authors:  Hsin-Tzu Tai; Yen-Chun Lin; Jing-Yao Ma; Chieh-Tsung Lo
Journal:  Polymers (Basel)       Date:  2019-08-16       Impact factor: 4.329

4.  Design of new bioinspired GO-COOH decorated alginate/gelatin hybrid scaffolds with nanofibrous architecture: structural, mechanical and biological investigations.

Authors:  Jana Ghitman; Elena Iuliana Biru; Elena Cojocaru; Gratiela Gradisteanu Pircalabioru; Eugeniu Vasile; Horia Iovu
Journal:  RSC Adv       Date:  2021-04-13       Impact factor: 3.361

5.  Additive Manufacturing Polyurethane Acrylate via Stereolithography for 3D Structure Polymer Electrolyte Application.

Authors:  Muhammad Faishal Norjeli; Nizam Tamchek; Zurina Osman; Ikhwan Syafiq Mohd Noor; Mohd Zieauddin Kufian; Mohd Ifwat Bin Mohd Ghazali
Journal:  Gels       Date:  2022-09-15

6.  Improving Minutiae Image of Latent Fingerprint Detection on Non-Porous Surface Materials under UV Light Using Sulfur Doped Carbon Quantum Dots from Magnolia Grandiflora Flower.

Authors:  David Nugroho; Won-Chun Oh; Saksit Chanthai; Rachadaporn Benchawattananon
Journal:  Nanomaterials (Basel)       Date:  2022-09-21       Impact factor: 5.719

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.