Recycling of steel slag and glass cullet from energy saving lamps by fast firing production of ceramics.

The paper reports on some experimental results obtained from the production of ceramics containing steel slag and glass cullet from exhaust energy saving lamps mixed in different proportions. Blending of components was done by attrition milling. Pressed powders were fast fired (50 min, cold to cold) in air up to several temperatures in the range 1000-1140 degrees C. The sintering behaviour was studied by shrinkage and water absorption measurements. Density, strength and hardness of the fired bodies were determined and XRD were examined. The fired samples were finally tested in acidic environment in order to evaluate their elution behaviour and consequently their possible environmental compatibility. It is observed that the composition containing 60 wt.% of steel slag and 40 wt.% of glass cullet displayed the best overall behaviour. 2010 Elsevier Ltd. All rights reserved.