Sorting minor subpopulations of cells: use of fluorescence as the triggering signal.

Flow cytometric cell sorting is commonly used to obtain purified subpopulations of cells for use in in vitro and in vivo assays. This can be time-consuming if the subpopulations of interest represent very low percentages of the cell suspension under study. Often the desired subpopulations are identified by two-color immunofluorescence staining. Generally, cell sorting is performed with a flow cytometer configured to trigger on light scatter signals, then sort windows are set based upon the signals from both fluorescent markers. We demonstrate that triggering the cytometer with the fluorescence signal from antibody staining common to both of the desired subpopulations, then sorting the subpopulations based upon staining of a second marker, substantially increases the speed of cell sorting vis-à-vis traditional methods. This is because undesired events are not analysed, allowing an increase in the throughput rate. While desired subpopulations of cells can be obtained by this method, undesired (i.e., nonstaining) cell "contaminants" increase and may require a second sort. The combined time for the initial enrichment sort and a second sort can be less than sorting once using standard methodology. Alternatively, the degree of contamination may be controlled by adjusting the concentration of the cell suspension and by the sample flow rate.