Literature DB >> 20229596

Development of a microflow digital imaging assay to characterize protein particulates during storage of a high concentration IgG1 monoclonal antibody formulation.

Klaus Wuchner1, Jochen Büchler, Rene Spycher, Paul Dalmonte, David B Volkin.   

Abstract

The development of a Microflow digital imaging (MDI) method to detect and monitor protein particulates in a high concentration IgG1 monoclonal antibody formulation is presented. The MDI assay was optimized and qualified as a characterization assay in terms of accuracy and precision of particle size and number using polystyrene standards (5-300 microm) and protein particles (2 to >100 microm). The stability profile of a 90 mg/mL IgG1 formulation stored at 2-8 degrees C and -70 degrees C for up to 18 months was then investigated. The MDI assay results showed improved sensitivity to detect subvisible particulates (>or=5 microm) compared to conventional light obscuration detection, presumably due to the translucent nature of the protein particles. For evaluation of visible protein particles (>70 microm), a good overall correlation was observed for MDI, inverted microscopy and visual assessments. Long-term stability data for a high concentration IgG1 monoclonal antibody formulation demonstrated an accumulation of protein particles in certain size categories with a concomitant increase in the overall particle size distribution over time. The weight amount of protein particulates in the IgG1 formulation was measured experimentally as approximately 0.022% (approximately 20 microg/mL) after storage at 2-8 degrees C for 16 months. Similar results were obtained by calculation from the MDI particle data indicating a low level of protein particulates by weight. The nature and composition of the protein particulates formed during storage were further characterized by a combination of inverted microscopy, FTIR microscopy, and SEM-EDX. Particulates were identified as protein with silicone, although some particles also contained other elements such as aluminum. The combination of MDI results and protein characterization studies have provided an enhanced understanding of protein particulate formation during long-term storage of a high concentration IgG1 monoclonal antibody formulation. (c) 2010 Wiley-Liss, Inc. and the American Pharmacists Association

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20229596     DOI: 10.1002/jps.22123

Source DB:  PubMed          Journal:  J Pharm Sci        ISSN: 0022-3549            Impact factor:   3.534


  17 in total

1.  Discrimination between silicone oil droplets and protein aggregates in biopharmaceuticals: a novel multiparametric image filter for sub-visible particles in microflow imaging analysis.

Authors:  René Strehl; Verena Rombach-Riegraf; Manuel Diez; Kamal Egodage; Markus Bluemel; Margit Jeschke; Atanas V Koulov
Journal:  Pharm Res       Date:  2011-09-27       Impact factor: 4.200

2.  Flow imaging microscopy for protein particle analysis--a comparative evaluation of four different analytical instruments.

Authors:  Sarah Zölls; Daniel Weinbuch; Michael Wiggenhorn; Gerhard Winter; Wolfgang Friess; Wim Jiskoot; Andrea Hawe
Journal:  AAPS J       Date:  2013-08-31       Impact factor: 4.009

Review 3.  Protein particulate detection issues in biotherapeutics development--current status.

Authors:  Tapan K Das
Journal:  AAPS PharmSciTech       Date:  2012-05-08       Impact factor: 3.246

Review 4.  High-throughput biophysical analysis of protein therapeutics to examine interrelationships between aggregate formation and conformational stability.

Authors:  Rajoshi Chaudhuri; Yuan Cheng; C Russell Middaugh; David B Volkin
Journal:  AAPS J       Date:  2013-10-31       Impact factor: 4.009

5.  Measurement of Average Aggregate Density by Sedimentation and Brownian Motion Analysis.

Authors:  Richard E Cavicchi; Jason King; Dean C Ripple
Journal:  J Pharm Sci       Date:  2018-02-01       Impact factor: 3.534

6.  Structural characterization of IgG1 mAb aggregates and particles generated under various stress conditions.

Authors:  Srivalli N Telikepalli; Ozan S Kumru; Cavan Kalonia; Reza Esfandiary; Sangeeta B Joshi; C Russell Middaugh; David B Volkin
Journal:  J Pharm Sci       Date:  2014-01-22       Impact factor: 3.534

7.  Radar chart array analysis to visualize effects of formulation variables on IgG1 particle formation as measured by multiple analytical techniques.

Authors:  Cavan Kalonia; Ozan S Kumru; Jae Hyun Kim; C Russell Middaugh; David B Volkin
Journal:  J Pharm Sci       Date:  2013-10-09       Impact factor: 3.534

8.  Protein Adsorption and Layer Formation at the Stainless Steel-Solution Interface Mediates Shear-Induced Particle Formation for an IgG1 Monoclonal Antibody.

Authors:  Cavan K Kalonia; Frank Heinrich; Joseph E Curtis; Sid Raman; Maria A Miller; Steven D Hudson
Journal:  Mol Pharm       Date:  2018-02-20       Impact factor: 4.939

9.  A Flow-Cytometry-Based Approach to Facilitate Quantification, Size Estimation and Characterization of Sub-visible Particles in Protein Solutions.

Authors:  Christian Lubich; Mantas Malisauskas; Thomas Prenninger; Thomas Wurz; Peter Matthiessen; Peter L Turecek; Friedrich Scheiflinger; Birgit M Reipert
Journal:  Pharm Res       Date:  2015-03-19       Impact factor: 4.200

10.  Immunogenicity of different stressed IgG monoclonal antibody formulations in immune tolerant transgenic mice.

Authors:  Vasco Filipe; Wim Jiskoot; Abdul Hafid Basmeleh; Andhyk Halim; Huub Schellekens; Vera Brinks
Journal:  MAbs       Date:  2012-09-05       Impact factor: 5.857

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.