Literature DB >> 20198653

New milliliter-scale stirred tank bioreactors for the cultivation of mycelium forming microorganisms.

Ralf Hortsch1, Ansgar Stratmann, Dirk Weuster-Botz.   

Abstract

A novel milliliter-scale stirred tank bioreactor was developed for the cultivation of mycelium forming microorganisms on a 10 milliliter-scale. A newly designed one-sided paddle impeller is driven magnetically and rotates freely on an axis in an unbaffled reaction vessel made of polystyrene. A rotating lamella is formed which spreads out along the reactor wall. Thus an enhanced surface-to-volume ratio of the liquid phase is generated where oxygen is introduced via surface aeration. Volumetric oxygen transfer coefficients (k(L)a) > 0.15 s(-1) were measured. The fast moving liquid lamella efficiently prevents wall growth and foaming. Mean power consumption and maximum local energy dissipation were measured as function of operating conditions in the milliliter-scale stirred tank bioreactor (V = 10 mL) and compared to a standard laboratory-scale stirred tank bioreactor with six-bladed Rushton turbines (V = 2,000 mL). Mean power consumption increases with increasing impeller speed and shows the same characteristics and values on both scales. The maximum local energy dissipation of the milliliter-scale stirred tank bioreactor was reduced compared to the laboratory-scale at the same mean volumetric power input. Hence the milliliter impeller distributes power more uniformly in the reaction medium. Based on these data a reliable and robust scale-up of fermentation processes is possible. This was demonstrated with the cultivation of the actinomycete Streptomyces tendae on both scales. It was shown that the process performances were equivalent with regard to biomass concentration, mannitol consumption and production of the pharmaceutical relevant fungicide nikkomycin Z up to a process time of 120 h. A high parallel reproducibility was observed on the milliliter-scale (standard deviation < 8%) with up to 48 stirred tank bioreactors operated in a magnetic inductive drive. Rheological behavior of the culture broth was measured and showed a highly viscous shear-thinning non-Newtonian behavior. The newly developed one-sided paddle impellers operated in unbaffled reactors on a 10 milliliter-scale with a magnetic inductive drive for up to 48 parallel bioreactors allows for the first time the parallel bioprocess development with mycelium forming microorganisms. This is especially important since these kinds of cultivations normally exhibit process times of 100 h and more. Thus the operation of parallel stirred tank reactors will have the potential to reduce process development times drastically. 2010 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20198653     DOI: 10.1002/bit.22706

Source DB:  PubMed          Journal:  Biotechnol Bioeng        ISSN: 0006-3592            Impact factor:   4.530


  8 in total

1.  Novel approach of high cell density recombinant bioprocess development: optimisation and scale-up from microliter to pilot scales while maintaining the fed-batch cultivation mode of E. coli cultures.

Authors:  Juozas Siurkus; Johanna Panula-Perälä; Uwe Horn; Mario Kraft; Renata Rimseliene; Peter Neubauer
Journal:  Microb Cell Fact       Date:  2010-05-20       Impact factor: 5.328

2.  Significance of Heavy-Ion Beam Irradiation-Induced Avermectin B1a Production by Engineered Streptomyces avermitilis.

Authors:  Shu-Yang Wang; Yong-Heng Bo; Xiang Zhou; Ji-Hong Chen; Wen-Jian Li; Jian-Ping Liang; Guo-Qing Xiao; Yu-Chen Wang; Jing Liu; Wei Hu; Bo-Ling Jiang
Journal:  Biomed Res Int       Date:  2017-01-24       Impact factor: 3.411

3.  Generic Protocol for Optimization of Heterologous Protein Production Using Automated Microbioreactor Technology.

Authors:  Johannes Hemmerich; Lars Freier; Wolfgang Wiechert; Eric von Lieres; Marco Oldiges
Journal:  J Vis Exp       Date:  2017-12-15       Impact factor: 1.355

4.  Online 2D Fluorescence Monitoring in Microtiter Plates Allows Prediction of Cultivation Parameters and Considerable Reduction in Sampling Efforts for Parallel Cultivations of Hansenula polymorpha.

Authors:  Christoph Berg; Nina Ihling; Maurice Finger; Olivier Paquet-Durand; Bernd Hitzmann; Jochen Büchs
Journal:  Bioengineering (Basel)       Date:  2022-09-04

Review 5.  Oxygen transfer characteristics of miniaturized bioreactor systems.

Authors:  Timothy V Kirk; Nicolas Szita
Journal:  Biotechnol Bioeng       Date:  2013-01-17       Impact factor: 4.530

6.  Electromagnetic stirring in a microbioreactor with non-conventional chamber morphology and implementation of multiplexed mixing.

Authors:  Christabel Kl Tan; Matthew J Davies; Daniel K McCluskey; Ian R Munro; Mauryn C Nweke; Mark C Tracey; Nicolas Szita
Journal:  J Chem Technol Biotechnol       Date:  2015-07-17       Impact factor: 3.174

Review 7.  Miniaturization and 3D Printing of Bioreactors: A Technological Mini Review.

Authors:  Spyridon Achinas; Jorn-Ids Heins; Janneke Krooneman; Gerrit Jan Willem Euverink
Journal:  Micromachines (Basel)       Date:  2020-09-14       Impact factor: 2.891

Review 8.  Microbioreactor (micro-Matrix) potential in aerobic and anaerobic conditions with different industrially relevant microbial strains.

Authors:  Sergio D'ambrosio; Michela Ventrone; Alberto Alfano; Chiara Schiraldi; Donatella Cimini
Journal:  Biotechnol Prog       Date:  2021-07-05
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.