Literature DB >> 20160931

Stress relaxation via addition-fragmentation chain transfer in a thiol-ene photopolymerization.

Christopher J Kloxin1, Timothy F Scott, Christopher N Bowman.   

Abstract

Allyl sulfide addition-fragmentation chain transfer was employed concurrently with the radical-mediated formation of a thiol-ene network to enable network adaptation and mitigation of polymerization-induced shrinkage stress. This result represents the first demonstration of simultaneous polymerization and network adaptation in covalently crosslinked networks with significant implications for the fabrication of low stress polymer networks. For comparison, analogous networks incorporating propyl sulfide moieties, incapable of addition-fragmentation, were synthesized and evaluated in parallel. At the highest irradiation intensity, the allyl sulfide-containing material demonstrated a more than 75% reduction in the final stress when compared with the propyl sulfide-containing material. Analysis of the conversion evolution revealed that allyl sulfide addition-fragmentation decreased the polymerization rate owing to thiyl radical sequestration. Slow consumption of the allyl sulfide functional group suggests that intramolecular homolytic substitution occurs by a step-wise, rather than concerted, mechanism. Simultaneous stress and conversion measurements demonstrated that the initial stress evolution was identical for both the allyl and propyl sulfide-containing materials but diverged after gelation. While addition-fragmentation chain transfer was found to occur throughout the polymerization, its effect on the stress evolution was concentrated towards the end of polymerization when network rearrangement becomes the dominant mechanism for stress relaxation. Even after the polymerization reaction was completed, the polymerization-induced shrinkage stress in the allyl sulfide-containing material continued to decrease, exhibiting a maximum in the stress evolution and demonstrating the potential for continuing, longer term stress relaxation.

Entities:  

Year:  2009        PMID: 20160931      PMCID: PMC2764301          DOI: 10.1021/ma802771b

Source DB:  PubMed          Journal:  Macromolecules        ISSN: 0024-9297            Impact factor:   5.985


  7 in total

1.  Probing the origins and control of shrinkage stress in dental resin-composites: I. Shrinkage stress characterization technique.

Authors:  H Lu; J W Stansbury; S H Dickens; F C Eichmiller; C N Bowman
Journal:  J Mater Sci Mater Med       Date:  2004-10       Impact factor: 3.896

2.  Aspherical lenses produced by a fast high-precision replication process using UV-curable coatings.

Authors:  R J Zwiers; G C Dortant
Journal:  Appl Opt       Date:  1985-12-15       Impact factor: 1.980

3.  Thiol-ene oligomers as dental restorative materials.

Authors:  Jacquelyn A Carioscia; Hui Lu; Jeffrey W Stanbury; Christopher N Bowman
Journal:  Dent Mater       Date:  2005-07-25       Impact factor: 5.304

4.  Investigations of step-growth thiol-ene polymerizations for novel dental restoratives.

Authors:  Hui Lu; Jacquelyn A Carioscia; Jeffery W Stansbury; Christopher N Bowman
Journal:  Dent Mater       Date:  2005-07-25       Impact factor: 5.304

5.  Photocurable epoxy-polyol matrices for use in dental composites I.

Authors:  D A Tilbrook; R L Clarke; N E Howle; M Braden
Journal:  Biomaterials       Date:  2000-09       Impact factor: 12.479

6.  Synthesis and evaluation of new oxaspiro monomers for double ring-opening polymerization.

Authors:  J W Stansbury
Journal:  J Dent Res       Date:  1992-07       Impact factor: 6.116

7.  Photoinduced plasticity in cross-linked polymers.

Authors:  Timothy F Scott; Andrew D Schneider; Wayne D Cook; Christopher N Bowman
Journal:  Science       Date:  2005-06-10       Impact factor: 47.728

  7 in total
  34 in total

Review 1.  Recent advances and developments in composite dental restorative materials.

Authors:  N B Cramer; J W Stansbury; C N Bowman
Journal:  J Dent Res       Date:  2010-10-05       Impact factor: 6.116

2.  Polymers for 3D Printing and Customized Additive Manufacturing.

Authors:  Samuel Clark Ligon; Robert Liska; Jürgen Stampfl; Matthias Gurr; Rolf Mülhaupt
Journal:  Chem Rev       Date:  2017-07-30       Impact factor: 60.622

3.  Thiol-ene Photocrosslinking of Cytocompatible Resilin-Like Polypeptide-PEG Hydrogels.

Authors:  Christopher L McGann; Rebekah E Dumm; Anna K Jurusik; Ishnoor Sidhu; Kristi L Kiick
Journal:  Macromol Biosci       Date:  2015-10-05       Impact factor: 4.979

4.  Stress relaxation of trithiocarbonate-dimethacrylate-based dental composites.

Authors:  Hee Young Park; Christopher J Kloxin; Mark F Fordney; Christopher N Bowman
Journal:  Dent Mater       Date:  2012-05-18       Impact factor: 5.304

5.  Stress Relaxation by Addition-Fragmentation Chain Transfer in Highly Crosslinked Thiol-Yne Networks.

Authors:  Hee Young Park; Christopher J Kloxin; Timothy F Scott; Christopher N Bowman
Journal:  Macromolecules       Date:  2010       Impact factor: 5.985

6.  Kinetics and mechanics of photo-polymerized triazole-containing thermosetting composites via the copper(I)-catalyzed azide-alkyne cycloaddition.

Authors:  Han Byul Song; Xiance Wang; James R Patton; Jeffrey W Stansbury; Christopher N Bowman
Journal:  Dent Mater       Date:  2017-03-28       Impact factor: 5.304

7.  Stress Reduction and T(g) Enhancement in Ternary Thiol-Yne-Methacrylate Systems via Addition-fragmentation Chain Transfer.

Authors:  Hee Young Park; Christopher J Kloxin; Mark F Fordney; Christopher N Bowman
Journal:  Macromolecules       Date:  2012-07-03       Impact factor: 5.985

8.  Synthesis and Characterization of Thiol-Ene Functionalized Siloxanes and Evaluation of their Crosslinked Network Properties.

Authors:  Megan A Cole; Christopher N Bowman
Journal:  J Polym Sci A Polym Chem       Date:  2012-07-20       Impact factor: 2.702

9.  Thiol-ene functionalized siloxanes for use as elastomeric dental impression materials.

Authors:  Megan A Cole; Katherine C Jankousky; Christopher N Bowman
Journal:  Dent Mater       Date:  2014-02-16       Impact factor: 5.304

10.  Reduced shrinkage stress via photo-initiated copper(I)-catalyzed cycloaddition polymerizations of azide-alkyne resins.

Authors:  Han Byul Song; Nancy Sowan; Parag K Shah; Austin Baranek; Alexander Flores; Jeffrey W Stansbury; Christopher N Bowman
Journal:  Dent Mater       Date:  2016-08-11       Impact factor: 5.304

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.