Literature DB >> 20156673

Composition and production rate of medical waste from a small producer in Greece.

Anastasios Graikos1, Evangelos Voudrias, Athanasios Papazachariou, Nikolaos Iosifidis, Maria Kalpakidou.   

Abstract

The objective of this work was to determine the composition and production rate of medical waste from the health care facility of social insurance institute, a small waste producer in Xanthi, Greece. Specifically, produced medical waste from the clinical pathology (medical microbiology) laboratory, the X-ray laboratory and the surgery and injection therapy departments of the health facility was monitored for six working weeks. A total of 240 kg medical solid waste was manually separated and weighed and 330 L of liquid medical waste was measured and classified. The hazardous waste fraction (%w/w) of the medical solid waste was 91.6% for the clinical pathology laboratory, 12.9% for the X-ray laboratory, 24.2% for the surgery departments and 17.6% for the injection therapy department. The infectious waste fraction (%w/w) of the hazardous medical solid waste was 75.6% for the clinical pathology laboratory, 0% for the X-ray laboratory, 100% for the surgery departments and 75.6% for the injection therapy department. The total hazardous medical solid waste production rate was 64+/-15 g/patient/d for the clinical pathology laboratory, 7.2+/-1.6 g/patient/d for the X-ray laboratory, 8.3+/-5.1 g/patient/d for the surgery departments and 24+/-9 g/patient/d for the injection therapy department. Liquid waste was produced by the clinical pathology laboratory (infectious-and-toxic) and the X-ray laboratory (toxic). The production rate for the clinical pathology laboratory was 0.03+/-0.003 L/patient/d and for the X-ray laboratory was 0.06+/-0.006 L/patient/d. Due to the small amount produced, it was suggested that the most suitable management scheme would be to transport the hazardous medical waste, after source-separation, to the Prefectural Hospital of Xanthi to be treated with the hospital waste. Assuming this data is representative of other small medical facilities, medical waste production can be estimated for such facilities distributed around Greece. 2010 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20156673     DOI: 10.1016/j.wasman.2010.01.025

Source DB:  PubMed          Journal:  Waste Manag        ISSN: 0956-053X            Impact factor:   7.145


  2 in total

1.  Analysis of quality and quantity of health-care wastes in clinical laboratories: a case study of Ilam city.

Authors:  Sajad Mazloomi; Ahmad Zarei; Shokoufeh Alasvand; Atefeh Farhadi; Heshmatoallah Nourmoradi; Ziaeddin Bonyadi
Journal:  Environ Monit Assess       Date:  2019-03-07       Impact factor: 2.513

2.  Assessment and selection of the best treatment alternative for infectious waste by modified Sustainability Assessment of Technologies methodology.

Authors:  Ata Rafiee; Kamyar Yaghmaeian; Mohammad Hoseini; Saeid Parmy; Amirhosein Mahvi; Masud Yunesian; Mehran Khaefi; Ramin Nabizadeh
Journal:  J Environ Health Sci Eng       Date:  2016-05-27
  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.