Furan in coffee: pilot studies on formation during roasting and losses during production steps and consumer handling.

The occurrence of furan in some food products has already been known for a few decades, and it has been reconfirmed in more recent investigations that furan is present in a variety of foodstuffs. This list of products includes roasted coffee, which has been shown to generate furan as a result of the heat treatment at roasting which is applied to achieve the desired aroma and flavour profile of a roasted coffee. The objective of this study is to provide data to allow a better understanding of the available data of furan in coffee, the kinetics of furan generated during roasting, and to estimate the reduction of furan levels afterwards due to subsequent processing steps and consumer handling. Finally, the study is meant as a contribution to establish exposure data on the basis of scientific data at the stage of coffee consumption. This paper shows that the formation of furan during roasting is dependent on roasting conditions and is, therefore, directly linked to achieving targeted flavour profiles. Furthermore, it is demonstrated that modifications in process conditions potentially to reduce furan levels may have the opposite effect on other undesired reaction products of the roasting chemistry such as, for example, acrylamide. Due to the high volatility of furan, any subsequent processing step or consumer handling has an impact on the level of furan. As a guidance from this study and in consideration of the identified losses of each process and handling step on the basis of the trial conditions, it is estimated that only approximately 10% of the initially generated furan during roasting gets into the cup of coffee for consumption.