Literature DB >> 20129732

Biodegradation of propionitrile by Klebsiella oxytoca immobilized in alginate and cellulose triacetate gel.

C Y Chen1, S C Chen, M Fingas, C M Kao.   

Abstract

A microbial process for the degradation of propionitrile by Klebsiella oxytoca was studied. The microorganism, K. oxytoca, was isolated from the discharged wastewater of metal plating factory in southern Taiwan and adapted for propionitrile biodegradation. The free and immobilized cells of K. oxytoca were then examined for their capabilities on degrading propionitrile under various conditions. Alginate (AL) and cellulose triacetate (CT) techniques were applied for the preparation of immobilized cells. The efficiency and produced metabolic intermediates and end-products of propionitrile degradation were monitored in bath and continuous bioreactor experiments. Results reveal that up to 100 and 150 mM of propionitrile could be removed completely by the free and immobilized cell systems, respectively. Furthermore, both immobilized cell systems show higher removal efficiencies in wider ranges of temperature (20-40 degrees C) and pH (6-8) compared with the free cell system. Results also indicate that immobilized cell system could support a higher cell density to enhance the removal efficiency of propionitrile. Immobilized cells were reused in five consecutive degradation experiments, and up to 99% of propionitrile degradation was observed in each batch test. This suggests that the activity of immobilized cells can be maintained and reused throughout different propionitrile degradation processes. A two-step pathway was observed for the biodegradation of propionitrile. Propionamide was first produced followed by propionic acid and ammonia. Results suggest that nitrile hydratase and amidase were involved in the degradation pathways of K. oxytoca. In the continuous bioreactor, both immobilized cells were capable of removing 150 mM of propionitriles completely within 16h, and the maximum propionitriles removal rates using AL and CT immobilized beads were 5.04 and 4.98 mM h(-1), respectively. Comparing the removal rates obtained from batch experiments with immobilized cells (AL and CT were 1.57 and 2.18 mM h(-1) at 150 mM of propionitrile, respectively), the continuous-flow bioreactor show higher potential for practical application. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20129732     DOI: 10.1016/j.jhazmat.2009.12.112

Source DB:  PubMed          Journal:  J Hazard Mater        ISSN: 0304-3894            Impact factor:   10.588


  3 in total

1.  Immobilization of Pseudomonas sp. DG17 onto sodium alginate-attapulgite-calcium carbonate.

Authors:  Hong Qi Wang; Fei Hua; Yi Cun Zhao; Yi Li; Xuan Wang
Journal:  Biotechnol Biotechnol Equip       Date:  2014-11-07       Impact factor: 1.632

2.  Biodegradation of butyronitrile and demonstration of its mineralization by Rhodococcus sp. MTB5.

Authors:  Ismailsab Mukram; Masarbo Ramesh; T R Monisha; Anand S Nayak; T B Karegoudar
Journal:  3 Biotech       Date:  2016-06-22       Impact factor: 2.406

Review 3.  Exploring anaerobic environments for cyanide and cyano-derivatives microbial degradation.

Authors:  Víctor M Luque-Almagro; Purificación Cabello; Lara P Sáez; Alfonso Olaya-Abril; Conrado Moreno-Vivián; María Dolores Roldán
Journal:  Appl Microbiol Biotechnol       Date:  2017-12-05       Impact factor: 4.813

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.