Literature DB >> 20064643

Influence of coating bath chemistry on the deposition of 3-mercaptopropyl trimethoxysilane films deposited on magnesium alloy.

A F Scott1, J E Gray-Munro, J L Shepherd.   

Abstract

Magnesium alloys have a low specific density and a high strength to weight ratio. This makes them sought after light weight construction materials for automotive and aerospace applications. These materials have also recently become of interest for biomedical applications. Unfortunately, the use of magnesium alloys in many applications has been limited due to its high susceptibility to corrosion. One way to improve the corrosion resistance of magnesium alloys is through the deposition of protective coatings. Many of the current pretreatments/coatings available use toxic chemicals such as chromates and hydrofluoric acid. One possible environmentally friendly alternative is organosilane coatings which have been shown to offer significant corrosion protection to both aluminum alloys and steels. Organosilanes are ambifunctional molecules that are capable of covalent bonding to metal hydroxide surfaces. In order for covalent bonding to occur, the organosilane must undergo hydrolysis in the coating bath followed by a condensation reaction with the surface. There are a number of factors that influence the rates of these reactions such as pH and concentration of reactants. These factors can also influence competing reactions in solution such as oligomerization. The rates of hydrolysis and condensation of 3-mercaptopropyltrimethoxy silane in methanol have been analyzed with (1)H NMR and ATR-FTIR. The results indicate that organosilane oligomers begin to form in solution before the molecules are fully hydrolyzed. The organosilane films deposited on magnesium alloy AZ91 at a variety of concentrations and pre-hydrolysis times were characterized with a combination of ATR-FTIR, ellipsometry and SEM/EDS. The results show that both organosilane film thickness and uniformity are affected by the chemistry occurring in the coating bath prior to deposition. Crown Copyright 2009. Published by Elsevier Inc. All rights reserved.

Entities:  

Year:  2009        PMID: 20064643     DOI: 10.1016/j.jcis.2009.11.062

Source DB:  PubMed          Journal:  J Colloid Interface Sci        ISSN: 0021-9797            Impact factor:   8.128


  2 in total

1.  Reactivity of Waterlogged Archeological Elm Wood with Organosilicon Compounds Applied as Wood Consolidants: 2D 1H-13C Solution-State NMR Studies.

Authors:  Magdalena Broda; Daniel J Yelle
Journal:  Molecules       Date:  2022-05-25       Impact factor: 4.927

2.  Influence of mixed organosilane coatings with variable RGD surface densities on the adhesion and proliferation of human osteosarcoma Saos-2 cells to magnesium alloy AZ31.

Authors:  Xiaoxi Yang; Afrah Al Hegy; Eric R Gauthier; Joy Gray-Munro
Journal:  Bioact Mater       Date:  2017-01-27
  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.