Literature DB >> 20024052

Fabrication of a cyclic olefin copolymer planar waveguide embedded in a multi-channel poly(methyl methacrylate) fluidic chip for evanescence excitation.

Paul I Okagbare1, Jason M Emory, Proyag Datta, Jost Goettert, Steven A Soper.   

Abstract

The fabrication and characterization of a novel cyclic olefin copolymer (COC) waveguide embedded in a poly(methyl methacrylate), PMMA, fluidic chip configured in a multi-channel format with an integrated monolithic prism for evanescent fluorescence excitation are reported. The fabrication approach allowed the embedded waveguide to be situated orthogonal to a series of fluidic channels within the PMMA wafer to sample fluorescent solutions in these channels using the evanescence properties of the waveguide. Construction of the device was achieved using several fabrication techniques including high precision micromilling, hot embossing and stenciling of a polymer melt to form the waveguide and coupling prism. A waveguide channel was fabricated in the fluidic chip's cover plate, also made from PMMA, and was loaded with a COC solution using a pre-cast poly(dimethylsiloxane), PDMS, stencil containing a prism-shaped recess. The PMMA substrate contained multiple channels (100 microm wide x 30 microm deep with a pitch of 100 microm) that were situated orthogonal to the waveguide to allow penetration of the evanescent field into the sampling solution. The optical properties of the waveguide in terms of its transmission properties and penetration depth of the evanescent field in the adjacent solution were evaluated. Finally, the device was used for laser-induced fluorescence evanescent excitation of a dye solution hydrodynamically flowing through multiple microfluidic channels in the chip and processed using a microscope equipped with a charge-coupled device (CCD) for parallel readout. The device and optical system were able to image 11 channels simultaneously with a limit-of-detection of 7.1 x 10(-20) mol at a signal-to-noise ratio of 2. The waveguide was simple to manufacture and could be scaled to illuminate much higher channel numbers making it appropriate for high-throughput measurements using evanescent excitation.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 20024052      PMCID: PMC2859618          DOI: 10.1039/b908759a

Source DB:  PubMed          Journal:  Lab Chip        ISSN: 1473-0189            Impact factor:   6.799


  36 in total

1.  Array biosensor for simultaneous identification of bacterial, viral, and protein analytes.

Authors:  C A Rowe; L M Tender; M J Feldstein; J P Golden; S B Scruggs; B D MacCraith; J J Cras; F S Ligler
Journal:  Anal Chem       Date:  1999-09-01       Impact factor: 6.986

2.  A new immunoassay based on fluorescence excitation by internal reflection spectroscopy.

Authors:  M N Kronick; W A Little
Journal:  J Immunol Methods       Date:  1975-09       Impact factor: 2.303

Review 3.  Micro total analysis systems. 2. Analytical standard operations and applications.

Authors:  Pierre-Alain Auroux; Dimitri Iossifidis; Darwin R Reyes; Andreas Manz
Journal:  Anal Chem       Date:  2002-06-15       Impact factor: 6.986

4.  Integration of polymer waveguides for optical detection in microfabricated chemical analysis systems.

Authors:  Klaus B Mogensen; Jamil El-Ali; Anders Wolff; Jörg P Kutter
Journal:  Appl Opt       Date:  2003-07-01       Impact factor: 1.980

5.  Surface plasmon subwavelength optics.

Authors:  William L Barnes; Alain Dereux; Thomas W Ebbesen
Journal:  Nature       Date:  2003-08-14       Impact factor: 49.962

Review 6.  Micro total analysis systems. Recent developments.

Authors:  Torsten Vilkner; Dirk Janasek; Andreas Manz
Journal:  Anal Chem       Date:  2004-06-15       Impact factor: 6.986

7.  Lab-on-a-chip with integrated optical transducers.

Authors:  S Balslev; A M Jorgensen; B Bilenberg; K B Mogensen; D Snakenborg; O Geschke; J P Kutter; A Kristensen
Journal:  Lab Chip       Date:  2005-12-22       Impact factor: 6.799

8.  Optofluidic waveguides: I. Concepts and implementations.

Authors:  Holger Schmidt; Aaron R Hawkins
Journal:  Microfluid Nanofluidics       Date:  2008-01-01       Impact factor: 2.529

9.  Two-layered metallic film-induced surface plasmon polariton for fluorescence emission enhancement in on-chip waveguide.

Authors:  Biow Hiem Ong; Xiaocong Yuan; Yong Yi Tan; Rudi Irawan; Xiaoqin Fang; Lesheng Zhang; Swee Chuan Tjin
Journal:  Lab Chip       Date:  2007-03-09       Impact factor: 6.799

10.  Influence of master fabrication techniques on the characteristics of embossed microfluidic channels.

Authors:  Mandy B Esch; Sahil Kapur; Gizaida Irizarry; Vincent Genova
Journal:  Lab Chip       Date:  2003-05-02       Impact factor: 6.799

View more
  6 in total

1.  Thermoplastic microfluidic devices and their applications in protein and DNA analysis.

Authors:  Ke Liu; Z Hugh Fan
Journal:  Analyst       Date:  2011-01-28       Impact factor: 4.616

2.  Rapid fabrication of a microdevice with concave microwells and its application in embryoid body formation.

Authors:  Youchun Xu; Fengbo Xie; Tian Qiu; Lan Xie; Wanli Xing; Jing Cheng
Journal:  Biomicrofluidics       Date:  2012-02-24       Impact factor: 2.800

Review 3.  Micromilling: a method for ultra-rapid prototyping of plastic microfluidic devices.

Authors:  David J Guckenberger; Theodorus E de Groot; Alwin M D Wan; David J Beebe; Edmond W K Young
Journal:  Lab Chip       Date:  2015-06-07       Impact factor: 6.799

4.  Ligase detection reaction generation of reverse molecular beacons for near real-time analysis of bacterial pathogens using single-pair fluorescence resonance energy transfer and a cyclic olefin copolymer microfluidic chip.

Authors:  Zhiyong Peng; Steven A Soper; Maneesh R Pingle; Francis Barany; Lloyd M Davis
Journal:  Anal Chem       Date:  2010-11-03       Impact factor: 6.986

5.  Milling Positive Master for Polydimethylsiloxane Microfluidic Devices: The Microfabrication and Roughness Issues.

Authors:  Zhizhi Zhou; Dong Chen; Xiang Wang; Jiahuan Jiang
Journal:  Micromachines (Basel)       Date:  2017-09-21       Impact factor: 2.891

Review 6.  Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production.

Authors:  Chia-Wen Tsao
Journal:  Micromachines (Basel)       Date:  2016-12-10       Impact factor: 2.891

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.