Literature DB >> 20014437

Influence of substrate stiffness on the phenotype of heart cells.

Bashir Bhana1, Rohin K Iyer, Wen Li Kelly Chen, Ruogang Zhao, Krista L Sider, Morakot Likhitpanichkul, Craig A Simmons, Milica Radisic.   

Abstract

Adult cardiomyocytes (CM) retain little capacity to regenerate, which motivates efforts to engineer heart tissues that can emulate the functional and mechanical properties of native myocardium. Although the effects of matrix stiffness on individual CM have been explored, less attention was devoted to studies at the monolayer and the tissue level. The purpose of this study was to characterize the influence of substrate mechanical stiffness on the heart cell phenotype and functional properties. Neonatal rat heart cells were seeded onto collagen-coated polyacrylamide (PA) substrates with Young's moduli of 3, 22, 50, and 144 kPa. Collagen-coated glass coverslips without PA represented surfaces with effectively "infinite" stiffness. The local elastic modulus of native neonatal rat heart tissue was measured to range from 4.0 to 11.4 kPa (mean value of 6.8 kPa) and for native adult rat heart tissue from 11.9 to 46.2 kPa (mean value of 25.6 kPa), motivating our choice of the above PA gel stiffness. Overall, by 120 h of cultivation, the lowest stiffness PA substrates (3 kPa) exhibited the lowest excitation threshold (ET; 3.5 +/- 0.3 V/cm), increased troponin I staining (52% positively stained area) but reduced cell density, force of contraction (0.18 +/- 0.1 mN/mm(2)), and cell elongation (aspect ratio = 1.3-1.4). Higher stiffness (144 kPa) PA substrates exhibited reduced troponin I staining (30% positively stained area), increased fibroblast density (70% positively stained area), and poor electrical excitability. Intermediate stiffness PA substrates of stiffness comparable to the native adult rat myocardium (22-50 kPa) were found to be optimal for heart cell morphology and function, with superior elongation (aspect ratio > 4.3), reasonable ET (ranging from 3.95 +/- 0.8 to 4.4 +/- 0.7 V/cm), high contractile force development (ranging from 0.52 +/- 0.2 to 1.60 +/- 0.6 mN/mm(2)), and well-developed striations, all consistent with a differentiated phenotype. (c) 2009 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20014437     DOI: 10.1002/bit.22647

Source DB:  PubMed          Journal:  Biotechnol Bioeng        ISSN: 0006-3592            Impact factor:   4.530


  131 in total

1.  Microenvironment stiffness requires decellularized cardiac extracellular matrix to promote heart regeneration in the neonatal mouse heart.

Authors:  Xinming Wang; Subhadip Senapati; Akinola Akinbote; Bhargavee Gnanasambandam; Paul S-H Park; Samuel E Senyo
Journal:  Acta Biomater       Date:  2020-06-23       Impact factor: 8.947

2.  The effects of substrate stiffness on the in vitro activation of macrophages and in vivo host response to poly(ethylene glycol)-based hydrogels.

Authors:  Anna K Blakney; Mark D Swartzlander; Stephanie J Bryant
Journal:  J Biomed Mater Res A       Date:  2012-03-07       Impact factor: 4.396

3.  Synthetic matrices to serve as niches for muscle cell transplantation.

Authors:  Sarah Fernandes; Shannon Kuklok; Joe McGonigle; Hans Reinecke; Charles E Murry
Journal:  Cells Tissues Organs       Date:  2011-10-14       Impact factor: 2.481

4.  The contribution of cellular mechanotransduction to cardiomyocyte form and function.

Authors:  Sean P Sheehy; Anna Grosberg; Kevin Kit Parker
Journal:  Biomech Model Mechanobiol       Date:  2012-07-07

5.  Differential responses of induced pluripotent stem cell-derived cardiomyocytes to anisotropic strain depends on disease status.

Authors:  Young Wook Chun; David E Voyles; Rutwik Rath; Lucas H Hofmeister; Timothy C Boire; Henry Wilcox; Jae Han Lee; Leon M Bellan; Charles C Hong; Hak-Joon Sung
Journal:  J Biomech       Date:  2015-10-08       Impact factor: 2.712

Review 6.  Electrical and mechanical stimulation of cardiac cells and tissue constructs.

Authors:  Whitney L Stoppel; David L Kaplan; Lauren D Black
Journal:  Adv Drug Deliv Rev       Date:  2015-07-30       Impact factor: 15.470

Review 7.  Maturing human pluripotent stem cell-derived cardiomyocytes in human engineered cardiac tissues.

Authors:  Nicole T Feric; Milica Radisic
Journal:  Adv Drug Deliv Rev       Date:  2015-05-05       Impact factor: 15.470

8.  Design of Injectable Materials to Improve Stem Cell Transplantation.

Authors:  Laura M Marquardt; Sarah C Heilshorn
Journal:  Curr Stem Cell Rep       Date:  2016-07-01

9.  Structural Reinforcement of Cell-Laden Hydrogels with Microfabricated Three Dimensional Scaffolds.

Authors:  Chaenyung Cha; Pranav Soman; Wei Zhu; Mehdi Nikkhah; Gulden Camci-Unal; Shaochen Chen; Ali Khademhosseini
Journal:  Biomater Sci       Date:  2014-05-01       Impact factor: 6.843

10.  Cardiac Fibrotic Remodeling on a Chip with Dynamic Mechanical Stimulation.

Authors:  Ming Kong; Junmin Lee; Iman K Yazdi; Amir K Miri; Yi-Dong Lin; Jungmok Seo; Yu Shrike Zhang; Ali Khademhosseini; Su Ryon Shin
Journal:  Adv Healthc Mater       Date:  2019-01-04       Impact factor: 9.933

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.