Literature DB >> 19928796

Passive dosing for producing defined and constant exposure of hydrophobic organic compounds during in vitro toxicity tests.

Kilian E C Smith1, Gertie J Oostingh, Philipp Mayer.   

Abstract

Toxicity testing of hydrophobic organic compounds (HOCs) in plastic cell culture plates is problematic due to compound losses through volatilization and sorption to the wells and culture medium constituents. This leads to poorly defined exposure and reduced test sensitivity. Passive dosing can overcome these problems by the continual partitioning of HOCs from a dominating reservoir loaded in a biologically inert polymer such as silicone, providing defined and constant freely dissolved concentrations and also eliminating spiking with cosolvents. This study aimed to select a suitable passive dosing format for in vitro tests in multiwell plates and characterize its performance at 37 degrees C. Silicone O-rings were the most suitable format; they were both practical and demonstrated excellent passive dosing performance. (1) The rings were loaded by partitioning from a methanol solution containing polycyclic aromatic hydrocarbons (PAHs) (log K(OW), 3.33-6.43) that served as model compounds, followed by removal of the methanol with water. This resulted in highly reproducible HOC concentrations in the silicone O-rings. (2) The release of PAHs into aqueous solutions was rapid and reproducible, with equilibrium partitioning being reached within hours. (3) The buffering capacity of the O-rings was sufficient to maintain stable concentrations over more than 72 h. The O-rings were then applied to test a range of PAHs at their aqueous solubility in an array of established in vitro cell culture assays with human cells and cell lines. These included the formation of reactive oxygen species, induction of the IL-8 cytokine promoter, and secretion of MCP-1 by the cells. The biological responses depended on the melting point of the individual PAHs and their maximum chemical activities (a(max)). Only those PAHs with the highest a(max) stimulated the formation of reactive oxygen species and MCP-1 secretion, while they inhibited the induction of the IL-8 cytokine promoter.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 19928796     DOI: 10.1021/tx900274j

Source DB:  PubMed          Journal:  Chem Res Toxicol        ISSN: 0893-228X            Impact factor:   3.739


  5 in total

1.  Quantitation and prediction of sorptive losses during toxicity testing of polycyclic aromatic hydrocarbon (PAH) and nitrated PAH (NPAH) using polystyrene 96-well plates.

Authors:  Anna C Chlebowski; Robert L Tanguay; Staci L Massey Simonich
Journal:  Neurotoxicol Teratol       Date:  2016-05-08       Impact factor: 3.763

2.  Hexachlorobenzene exerts genotoxic effects in a humpback whale cell line under stable exposure conditions.

Authors:  Jenny Maner; Michael Burkard; Juan Carlos Cassano; Susan M Bengtson Nash; Kristin Schirmer; Marc J-F Suter
Journal:  RSC Adv       Date:  2019-11-29       Impact factor: 4.036

3.  Maintaining the Constant Exposure Condition for an Acute Caenorhabditis elegans Mortality Test Using Passive Dosing.

Authors:  Hyuck-Chul Kwon; Ji-Yeon Roh; Dongyoung Lim; Jinhee Choi; Jung-Hwan Kwon
Journal:  Environ Health Toxicol       Date:  2011-10-25

4.  Identification of informative features for predicting proinflammatory potentials of engine exhausts.

Authors:  Chia-Chi Wang; Ying-Chi Lin; Yuan-Chung Lin; Syu-Ruei Jhang; Chun-Wei Tung
Journal:  Biomed Eng Online       Date:  2017-08-18       Impact factor: 2.819

5.  Microscale In Vitro Assays for the Investigation of Neutral Red Retention and Ethoxyresorufin-O-Deethylase of Biofuels and Fossil Fuels.

Authors:  Sebastian Heger; Kerstin Bluhm; Julia Brendt; Philipp Mayer; Nico Anders; Andreas Schäffer; Thomas-Benjamin Seiler; Henner Hollert
Journal:  PLoS One       Date:  2016-09-29       Impact factor: 3.240

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.