Literature DB >> 19887125

Multiscale three-dimensional scaffolds for soft tissue engineering via multimodal electrospinning.

Sherif Soliman1, Stefania Pagliari, Antonio Rinaldi, Giancarlo Forte, Roberta Fiaccavento, Francesca Pagliari, Ornella Franzese, Marilena Minieri, Paolo Di Nardo, Silvia Licoccia, Enrico Traversa.   

Abstract

A novel (scalable) electrospinning process was developed to fabricate bio-inspired multiscale three-dimensional scaffolds endowed with a controlled multimodal distribution of fiber diameters and geared towards soft tissue engineering. The resulting materials finely mingle nano- and microscale fibers together, rather than simply juxtaposing them, as is commonly found in the literature. A detailed proof of concept study was conducted on a simpler bimodal poly(epsilon-caprolactone) (PCL) scaffold with modes of fiber distribution at 600 nm and 3.3 microm. Three conventional unimodal scaffolds with mean diameters of 300 nm and 2.6 and 5.2 microm, respectively, were used as controls to evaluate the new materials. Characterization of the microstructure (i.e. porosity, fiber distribution and pore structure) and mechanical properties (i.e. stiffness, strength and failure mode) indicated that the multimodal scaffold had superior mechanical properties (Young's modulus approximately 40MPa and strength approximately 1MPa) in comparison with the controls, despite the large porosity ( approximately 90% on average). A biological assessment was conducted with bone marrow stromal cell type (mesenchymal stem cells, mTERT-MSCs). While the new material compared favorably with the controls with respect to cell viability (on the outer surface), it outperformed them in terms of cell colonization within the scaffold. The latter result, which could neither be practically achieved in the controls nor expected based on current models of pore size distribution, demonstrated the greater openness of the pore structure of the bimodal material, which remarkably did not come at the expense of its mechanical properties. Furthermore, nanofibers were seen to form a nanoweb bridging across neighboring microfibers, which boosted cell motility and survival. Lastly, standard adipogenic and osteogenic differentiation tests served to demonstrate that the new scaffold did not hinder the multilineage potential of stem cells. Copyright 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19887125     DOI: 10.1016/j.actbio.2009.10.051

Source DB:  PubMed          Journal:  Acta Biomater        ISSN: 1742-7061            Impact factor:   8.947


  25 in total

Review 1.  Advancing musculoskeletal research with nanoscience.

Authors:  Cameron P Brown
Journal:  Nat Rev Rheumatol       Date:  2013-07-23       Impact factor: 20.543

Review 2.  ZnO Nanostructures and Electrospun ZnO-Polymeric Hybrid Nanomaterials in Biomedical, Health, and Sustainability Applications.

Authors:  Eloisa Ferrone; Rodolfo Araneo; Andrea Notargiacomo; Marialilia Pea; Antonio Rinaldi
Journal:  Nanomaterials (Basel)       Date:  2019-10-12       Impact factor: 5.076

3.  Effect of scaffold morphology and cell co-culture on tenogenic differentiation of HADMSC on centrifugal melt electrospun poly (L‑lactic acid) fibrous meshes.

Authors:  Shaohua Wu; Hao Peng; Xiuhong Li; Philipp N Streubel; Yong Liu; Bin Duan
Journal:  Biofabrication       Date:  2017-11-14       Impact factor: 9.954

4.  Engineering small-caliber vascular grafts from collagen filaments and nanofibers with comparable mechanical properties to native vessels.

Authors:  Fan Zhang; Yu Xie; Hakan Celik; Ozan Akkus; Susan H Bernacki; Martin W King
Journal:  Biofabrication       Date:  2019-05-17       Impact factor: 9.954

5.  Novel 3D scaffold with enhanced physical and cell response properties for bone tissue regeneration, fabricated by patterned electrospinning/electrospraying.

Authors:  Fatemeh Hejazi; Hamid Mirzadeh
Journal:  J Mater Sci Mater Med       Date:  2016-08-22       Impact factor: 3.896

Review 6.  In pursuit of functional electrospun materials for clinical applications in humans.

Authors:  Ryan J Stoddard; Arielle L Steger; Anna K Blakney; Kim A Woodrow
Journal:  Ther Deliv       Date:  2016-06-02

Review 7.  Mesenchymal stem cell cultivation in electrospun scaffolds: mechanistic modeling for tissue engineering.

Authors:  Ágata Paim; Isabel C Tessaro; Nilo S M Cardozo; Patricia Pranke
Journal:  J Biol Phys       Date:  2018-03-05       Impact factor: 1.365

Review 8.  Biomechanics and mechanobiology in functional tissue engineering.

Authors:  Farshid Guilak; David L Butler; Steven A Goldstein; Frank P T Baaijens
Journal:  J Biomech       Date:  2014-04-26       Impact factor: 2.712

9.  Bi-layered Tubular Microfiber Scaffolds as Functional Templates for Engineering Human Intestinal Smooth Muscle Tissue.

Authors:  Ying Chen; Chengchen Guo; Eleana Manousiouthakis; Xiuli Wang; Dana M Cairns; Terrence T Roh; Chuang Du; David L Kaplan
Journal:  Adv Funct Mater       Date:  2020-02-27       Impact factor: 18.808

10.  Fabrication and characterization of multiscale electrospun scaffolds for cartilage regeneration.

Authors:  Erica J Levorson; Perumcherry Raman Sreerekha; Krishna Prasad Chennazhi; F Kurtis Kasper; Shantikumar V Nair; Antonios G Mikos
Journal:  Biomed Mater       Date:  2013-01-25       Impact factor: 3.715

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.