A volcano curve: optimizing methanol electro-oxidation on Pt-decorated Ru nanoparticles.

Controlled Pt adlayers were deposited on commercial Ru nanoparticles (NPs) using an industrially scalable one-pot ethylene glycol (EG) reduction based method and were characterized by X-ray diffraction (XRD), electrochemical (EC) CO stripping voltammetry, inductively-coupled plasma optical emission spectrometry (ICP-OES), X-ray photoemission spectroscopy (XPS), and transmission electron microscopy (TEM). Compared with the previously used "spontaneous deposition", the wet chemistry-based EG method is less technically demanding, i.e. no need to handle high-temperature hydrogen reduction, offers a better control of the Pt packing density (PD), enables the formation of stable, segregated Pt surface adlayers for optimal tuning and use of Pt, and effectively prevents NPs sintering. Two batches of a total of 11 (8 vs. 3) samples with different values of Pt PD ranging from 0.05 to 0.93 were prepared, with a time interval of more than 18 months between the sytheses of the two batches of samples, and an excellent reproducibility of results was observed. All samples were investigated in terms of methanol (MeOH) electro-oxidation (EO) by cyclic voltammetry (CV) and chronoamperometry (CA). Although the peak current of CV increased as the Pt content increased, the long-term steady-state MeOH electro-oxidation current density of the Pt-decorated Ru NPs measured by CA showed a volcano curve as a function of the Pt PD, with the maximum appearing at the PD of 0.31. The optimal peak activity was approximately 150% higher than that of the industrial benchmark PtRu (1 : 1) alloy NPs and could deliver the same performance at half the electrode material cost. Fundamentally, such a volcano curve in the reaction current is the result of two competing processes of the EO of MeOH: the triple dehydrogenation of MeOH that prefers more Pt ensemble sites, and the elimination of poisonous CO that is enhanced by more adjacent Ru/Pt sites via the so-called bifunctional mechanism and also by possible electronic effects at low Pt coverages.