Literature DB >> 19634917

Phase behavior of poly(vinylpyrrolidone) containing amorphous solid dispersions in the presence of moisture.

Alfred C F Rumondor1, Patrick J Marsac, Lindsay A Stanford, Lynne S Taylor.   

Abstract

The objective of this study was to investigate the phase behavior of amorphous solid dispersions composed of a hydrophobic drug and a hydrophilic polymer following exposure to elevated relative humidity. Infrared (IR) spectroscopy, differential scanning calorimetry (DSC) and moisture sorption analysis were performed on five model systems (nifedipine-poly(vinylpyrrolidone) (PVP), indomethacin-PVP, ketoprofen-PVP, droperidol-PVP, and pimozide-PVP) immediately after production of the amorphous solid dispersions and following storage at room temperature and elevated relative humidity. Complete miscibility between the drug and the polymer immediately after solid dispersion formation was confirmed by the presence of specific drug-polymer interactions and a single glass transition (T(g)) event. Following storage at elevated relative humidity (75-94% RH), nifedipine-PVP, droperidol-PVP, and pimozide-PVP dispersions formed drug-rich and polymer-rich amorphous phases prior to crystallization of the drug, while indomethacin-PVP and ketoprofen-PVP dispersions did not. Drug crystallization in systems exhibiting amorphous-amorphous phase separation initiated earlier (<6 days at 94% RH) when compared to systems that remained miscible (>or=46 days at 94% RH). Evidence of moisture-induced amorphous-amorphous phase separation was observed following storage at as low as 54% RH for the pimozide-PVP system. It was concluded that, when an amorphous molecular level solid dispersion containing a hydrophobic drug and hydrophilic polymer is subjected to moisture, drug crystallization can occur via one of two routes: crystallization from the plasticized one-phase solid dispersion, or crystallization from a plasticized drug-rich amorphous phase in a two-phase solid dispersion. In the former case, the polymer is still present in the same phase as the drug, and can inhibit crystallization to a greater extent than the latter scenario, where the polymer concentration in the drug phase is reduced as a result of the amorphous-amorphous phase separation. The strength of drug-polymer interactions appears to be important in influencing the phase behavior.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19634917     DOI: 10.1021/mp900050c

Source DB:  PubMed          Journal:  Mol Pharm        ISSN: 1543-8384            Impact factor:   4.939


  24 in total

1.  Understanding the tendency of amorphous solid dispersions to undergo amorphous-amorphous phase separation in the presence of absorbed moisture.

Authors:  Alfred C F Rumondor; Håkan Wikström; Bernard Van Eerdenbrugh; Lynne S Taylor
Journal:  AAPS PharmSciTech       Date:  2011-09-17       Impact factor: 3.246

2.  Phase Behavior of Ritonavir Amorphous Solid Dispersions during Hydration and Dissolution.

Authors:  Hitesh S Purohit; Lynne S Taylor
Journal:  Pharm Res       Date:  2017-09-27       Impact factor: 4.200

3.  Melt Extrusion of High-Dose Co-Amorphous Drug-Drug Combinations : Theme: Formulation and Manufacturing of Solid Dosage Forms Guest Editors: Tony Zhou and Tonglei Li.

Authors:  Lærke Arnfast; Md Kamruzzaman; Korbinian Löbmann; Johanna Aho; Stefania Baldursdottir; Thomas Rades; Jukka Rantanen
Journal:  Pharm Res       Date:  2017-09-19       Impact factor: 4.200

4.  Molecular weight effects on the miscibility behavior of dextran and maltodextrin with poly(vinylpyrrolidone).

Authors:  Bernard Van Eerdenbrugh; Lynne S Taylor
Journal:  Pharm Res       Date:  2012-10       Impact factor: 4.200

5.  Improved Physical Stability and Aerosolization of Inhalable Amorphous Ciprofloxacin Powder Formulations by Incorporating Synergistic Colistin.

Authors:  Nivedita Shetty; Patricia Ahn; Heejun Park; Sonal Bhujbal; Dmitry Zemlyanov; Alex Cavallaro; Sharad Mangal; Jian Li; Qi Tony Zhou
Journal:  Mol Pharm       Date:  2018-08-03       Impact factor: 4.939

6.  Evaluation of drug-polymer miscibility in amorphous solid dispersion systems.

Authors:  Alfred C F Rumondor; Igor Ivanisevic; Simon Bates; David E Alonzo; Lynne S Taylor
Journal:  Pharm Res       Date:  2009-09-22       Impact factor: 4.200

7.  Water-solid interactions in amorphous maltodextrin-crystalline sucrose binary mixtures.

Authors:  Mohamed K Ghorab; Scott J Toth; Garth J Simpson; Lisa J Mauer; Lynne S Taylor
Journal:  Pharm Dev Technol       Date:  2013-03-12       Impact factor: 3.133

8.  A Strategy for Co-former Selection to Design Stable Co-amorphous Formations Based on Physicochemical Properties of Non-steroidal Inflammatory Drugs.

Authors:  Hiroshi Ueda; Noriyuki Muranushi; Satoshi Sakuma; Yasuo Ida; Takeshi Endoh; Kazunori Kadota; Yuichi Tozuka
Journal:  Pharm Res       Date:  2015-12-24       Impact factor: 4.200

9.  Evaluation of drug load and polymer by using a 96-well plate vacuum dry system for amorphous solid dispersion drug delivery.

Authors:  Po-Chang Chiang; Yingqing Ran; Kang-Jye Chou; Yong Cui; Amy Sambrone; Connie Chan; Ryan Hart
Journal:  AAPS PharmSciTech       Date:  2012-05-05       Impact factor: 3.246

10.  Qualitative and Quantitative Characterization of Composition Heterogeneity on the Surface of Spray Dried Amorphous Solid Dispersion Particles by an Advanced Surface Analysis Platform with High Surface Sensitivity and Superior Spatial Resolution.

Authors:  Sonal V Bhujbal; Dmitry Y Zemlyanov; Alex Cavallaro; Sharad Mangal; Lynne S Taylor; Qi Tony Zhou
Journal:  Mol Pharm       Date:  2018-04-17       Impact factor: 4.939

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.