Literature DB >> 19539063

Chemico-physical characterization of gelatin films modified with oxidized alginate.

E Boanini1, K Rubini, S Panzavolta, A Bigi.   

Abstract

The possibility of using low concentrations of dialdehyde alginate (ADA) to crosslink and stabilize gelatin films was investigated. The films were prepared from gelatin solutions at different concentrations (5, 10 and 15wt.%) containing different amounts of oxidized alginate (0, 1 and 3wt.% with respect to the weight of gelatin). The extent of crosslinking increases as a function of ADA concentration, up to about 23%. The presence of oxidized alginate provokes a significant reduction in the degree of swelling and of gelatin release in phosphate-buffered saline solution, enhancing the effect of gelatin concentration. Furthermore, the values of the Young's modulus, E, and of the stress at break, sigma(b), increase with increasing ADA concentration. The observed small, but appreciable, increase in thermal stability found by differential scanning calorimetric investigation is supported by X-ray diffraction results.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19539063     DOI: 10.1016/j.actbio.2009.06.015

Source DB:  PubMed          Journal:  Acta Biomater        ISSN: 1742-7061            Impact factor:   8.947


  6 in total

1.  Effect of sterilization and crosslinking on gelatin films.

Authors:  Sofia Amadori; Paola Torricelli; Katia Rubini; Milena Fini; Silvia Panzavolta; Adriana Bigi
Journal:  J Mater Sci Mater Med       Date:  2015-01-29       Impact factor: 3.896

2.  Injectable drug-loaded polysaccharide hybrid hydrogels for hemostasis.

Authors:  Jinying Cao; Ling Xiao; Xiaowen Shi
Journal:  RSC Adv       Date:  2019-11-12       Impact factor: 4.036

3.  Evaluation of fibroblasts adhesion and proliferation on alginate-gelatin crosslinked hydrogel.

Authors:  Bapi Sarker; Raminder Singh; Raquel Silva; Judith A Roether; Joachim Kaschta; Rainer Detsch; Dirk W Schubert; Iwona Cicha; Aldo R Boccaccini
Journal:  PLoS One       Date:  2014-09-30       Impact factor: 3.240

4.  Mussel-inspired polydopamine decorated alginate dialdehyde-gelatin 3D printed scaffolds for bone tissue engineering application.

Authors:  Farnaz Ghorbani; Minjoo Kim; Mahshid Monavari; Behafarid Ghalandari; Aldo R Boccaccini
Journal:  Front Bioeng Biotechnol       Date:  2022-08-08

5.  Curcumin-Functionalized Gelatin Films: Antioxidant Materials with Modulated Physico-Chemical Properties.

Authors:  Katia Rubini; Elisa Boanini; Silvia Parmeggiani; Adriana Bigi
Journal:  Polymers (Basel)       Date:  2021-05-31       Impact factor: 4.329

Review 6.  Options to Improve the Mechanical Properties of Protein-Based Materials.

Authors:  Anne Lamp; Martin Kaltschmitt; Jan Dethloff
Journal:  Molecules       Date:  2022-01-10       Impact factor: 4.411

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.