Literature DB >> 19515420

Cytocompatibility evaluation of amphiphilic, thermally responsive and chemically crosslinkable macromers for in situ forming hydrogels.

Leda Klouda1, Michael C Hacker, James D Kretlow, Antonios G Mikos.   

Abstract

The cytocompatibility of amphiphilic, thermoresponsive and chemically crosslinkable macromers was examined in vitro. Macromers synthesized from pentaerythritol diacrylate monostearate, N-isopropylacrylamide, acrylamide and hydroxyethyl acrylate in different molar ratios and with varying molecular weights and lower critical solution temperatures were evaluated for cytocompatibility with rat fibroblasts. Cell viabilities of over 60% for all and over 80% for most formulations were observed after 24-h incubation with macromers with molecular weights in the range of approximately 1500-3000 Da. The chemical modification of the macromers with a (meth)acrylate group was shown to have a time- and dose-dependent effect on cell viability. Uncrosslinked macromers with lower degrees of (meth)acrylation allowed for cell viability of over 60% for up to 6 h. (Meth)acrylated macromers with lower critical solution temperature (LCST) closer to physiological temperature allowed for higher cell viabilities as opposed to those with lower LCST. The data suggest that when the (meth)acrylated macromers are assembled into a physical gel, their cytotoxicity is diminished. After gel phase separation, cytotoxicity increased. This study gives information on the parameters that enable viable cell encapsulation for in situ forming hydrogel systems.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19515420      PMCID: PMC2730510          DOI: 10.1016/j.biomaterials.2009.05.029

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  28 in total

Review 1.  Hydrogels in pharmaceutical formulations.

Authors:  N A Peppas; P Bures; W Leobandung; H Ichikawa
Journal:  Eur J Pharm Biopharm       Date:  2000-07       Impact factor: 5.571

2.  Injectable biodegradable materials for orthopedic tissue engineering.

Authors:  J S Temenoff; A G Mikos
Journal:  Biomaterials       Date:  2000-12       Impact factor: 12.479

3.  IGF-1 regulates cardiac fibroblast apoptosis induced by osmotic stress.

Authors:  J W Mockridge; E C Benton; L V Andreeva; D S Latchman; M S Marber; R J Heads
Journal:  Biochem Biophys Res Commun       Date:  2000-06-24       Impact factor: 3.575

Review 4.  Cell encapsulation in biodegradable hydrogels for tissue engineering applications.

Authors:  Garret D Nicodemus; Stephanie J Bryant
Journal:  Tissue Eng Part B Rev       Date:  2008-06       Impact factor: 6.389

5.  Response of recombinant Chinese hamster ovary cells to hyperosmotic pressure: effect of Bcl-2 overexpression.

Authors:  No Soo Kim; Gyun Min Lee
Journal:  J Biotechnol       Date:  2002-05-23       Impact factor: 3.307

6.  The effects of scaffold thickness on tissue engineered cartilage in photocrosslinked poly(ethylene oxide) hydrogels.

Authors:  S J Bryant; K S Anseth
Journal:  Biomaterials       Date:  2001-03       Impact factor: 12.479

7.  Cytotoxicity of methyl methacrylate (MMA) and related compounds and their interaction with dipalmitoylphosphatidylcholine (DPPC) liposomes as a model for biomembranes.

Authors:  S Fujisawa; T Atsumi; Y Kadoma
Journal:  Oral Dis       Date:  2000-07       Impact factor: 3.511

8.  In vitro biocompatibility of biodegradable dextran-based hydrogels tested with human fibroblasts.

Authors:  C J De Groot; M J Van Luyn; W N Van Dijk-Wolthuis; J A Cadée; J A Plantinga; W Den Otter; W E Hennink
Journal:  Biomaterials       Date:  2001-06       Impact factor: 12.479

9.  Cyclic acetal hydrogel system for bone marrow stromal cell encapsulation and osteodifferentiation.

Authors:  Martha W Betz; Parth C Modi; John F Caccamese; Domenick P Coletti; John J Sauk; John P Fisher
Journal:  J Biomed Mater Res A       Date:  2008-09       Impact factor: 4.396

10.  Cellular responses to degradable cyclic acetal modified PEG hydrogels.

Authors:  Sachiko Kaihara; Shuichi Matsumura; John P Fisher
Journal:  J Biomed Mater Res A       Date:  2009-09-01       Impact factor: 4.396

View more
  10 in total

1.  Thermoresponsive, in situ cross-linkable hydrogels based on N-isopropylacrylamide: fabrication, characterization and mesenchymal stem cell encapsulation.

Authors:  Leda Klouda; Kevin R Perkins; Brendan M Watson; Michael C Hacker; Stephanie J Bryant; Robert M Raphael; F Kurtis Kasper; Antonios G Mikos
Journal:  Acta Biomater       Date:  2010-12-25       Impact factor: 8.947

2.  Mesenchymal stem cell and gelatin microparticle encapsulation in thermally and chemically gelling injectable hydrogels for tissue engineering.

Authors:  Stephanie N Tzouanas; Adam K Ekenseair; F Kurtis Kasper; Antonios G Mikos
Journal:  J Biomed Mater Res A       Date:  2014-02-05       Impact factor: 4.396

Review 3.  Building bridges: leveraging interdisciplinary collaborations in the development of biomaterials to meet clinical needs.

Authors:  Eliza L S Fong; Brendan M Watson; F Kurtis Kasper; Antonios G Mikos
Journal:  Adv Mater       Date:  2012-07-23       Impact factor: 30.849

Review 4.  Founder's award to Antonios G. Mikos, Ph.D., 2011 Society for Biomaterials annual meeting and exposition, Orlando, Florida, April 13-16, 2011: Bones to biomaterials and back again--20 years of taking cues from nature to engineer synthetic polymer scaffolds.

Authors:  James D Kretlow; Antonios G Mikos
Journal:  J Biomed Mater Res A       Date:  2011-06-28       Impact factor: 4.396

5.  Synthesis and characterization of thermally and chemically gelling injectable hydrogels for tissue engineering.

Authors:  Adam K Ekenseair; Kristel W M Boere; Stephanie N Tzouanas; Tiffany N Vo; F Kurtis Kasper; Antonios G Mikos
Journal:  Biomacromolecules       Date:  2012-05-11       Impact factor: 6.988

6.  Synthesis and characterization of dual stimuli responsive macromers based on poly(N-isopropylacrylamide) and poly(vinylphosphonic acid).

Authors:  James D Kretlow; Michael C Hacker; Leda Klouda; Brandy B Ma; Antonios G Mikos
Journal:  Biomacromolecules       Date:  2010-03-08       Impact factor: 6.988

7.  Synthesis, physicochemical characterization, and cytocompatibility of bioresorbable, dual-gelling injectable hydrogels.

Authors:  Tiffany N Vo; Adam K Ekenseair; F Kurtis Kasper; Antonios G Mikos
Journal:  Biomacromolecules       Date:  2013-12-16       Impact factor: 6.988

8.  Structure-property evaluation of thermally and chemically gelling injectable hydrogels for tissue engineering.

Authors:  Adam K Ekenseair; Kristel W M Boere; Stephanie N Tzouanas; Tiffany N Vo; F Kurtis Kasper; Antonios G Mikos
Journal:  Biomacromolecules       Date:  2012-08-23       Impact factor: 6.988

9.  Hydrogels in Healthcare: From Static to Dynamic Material Microenvironments.

Authors:  Chelsea M Kirschner; Kristi S Anseth
Journal:  Acta Mater       Date:  2013-02-01       Impact factor: 8.203

Review 10.  Multi-Functional Macromers for Hydrogel Design in Biomedical Engineering and Regenerative Medicine.

Authors:  Michael C Hacker; Hafiz Awais Nawaz
Journal:  Int J Mol Sci       Date:  2015-11-19       Impact factor: 5.923

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.