Literature DB >> 19501515

Feasibility of alloplastic mandibular reconstruction in patients following removal of oral squamous cell carcinoma.

Tobias Ettl1, Oliver Driemel, Bernd V Dresp, Torsten E Reichert, Jürgen Reuther, Hans Pistner.   

Abstract

INTRODUCTION: Microvascular bone grafts have evolved as the preferred technique for mandibular reconstruction in irradiated tumour patients. However immediate reconstruction by bridging plates remains an option for patients whose clinical condition is not favourable for microsurgical reconstruction. This retrospective study evaluates the performance of alloplastic mandibular reconstruction in patients following removal of oral squamous cell carcinoma. PATIENTS AND METHODS: Three hundred and thirty-four patients with primary (biopsy proven) oral squamous cell carcinoma without distant metastasis (stages II-IV), who were all treated by segmental mandibular resection and reconstruction by means of a titanium bridging plate were included. Two hundred and seventy-two patients received preoperative treatment, consisting of concomitant radiochemotherapy (RCT) (n=228), chemotherapy (n=34) and radiotherapy (n=10). Median follow-up was 5.1 years (min 0.3, max 18.0).
RESULTS: The median 2-year-disease-specific survival rate (DSS) was 81.6%. Five-year-DSS and 10-year-DSS was 71.8% and 62.0%, respectively. One hundred and thirty-six plates were removed due to infection with intra- and/or extraoral exposure, seven plates because of fracture. Preoperative RCT (p=0.027), mandibular defects including the symphysis (p=0.016) and heavy smoking at the time of diagnosis (p=0.042) were associated with infection-related failure of the reconstruction plates.
CONCLUSION: Reconstruction of mandibular defects with titanium bridging plates seems crucial in heavy smoking tumour patients with preoperative RCT as well as in mandibular defects including the symphysis. Copyright 2010 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19501515     DOI: 10.1016/j.jcms.2009.04.011

Source DB:  PubMed          Journal:  J Craniomaxillofac Surg        ISSN: 1010-5182            Impact factor:   2.078


  10 in total

1.  Mandibular reconstruction using free bone flap after preoperative chemoradiation.

Authors:  Heikki Irjala; Ilpo Kinnunen; Kalle Aitasalo
Journal:  Eur Arch Otorhinolaryngol       Date:  2011-10-12       Impact factor: 2.503

2.  Comparison of Mechanical Stability between Fibular Free Flap Reconstruction versus Locking Mandibular Reconstruction Plate Fixation.

Authors:  Jae-Hyun Chung; Eul-Sik Yoon; Seung-Ha Park; Byung-Il Lee; Hyon-Surk Kim; Hi-Jin You
Journal:  Arch Craniofac Surg       Date:  2014-08-14

Review 3.  Distant metastasis from oral cavity-correlation between histopathology results and primary site.

Authors:  Yuka Uchiyama; Tadashi Sasai; Atsutoshi Nakatani; Hiroaki Shimamoto; Tomomi Tsujimoto; Sven Kreiborg; Shumei Murakami
Journal:  Oral Radiol       Date:  2020-05-28       Impact factor: 1.852

4.  Biomechanical In Vitro Study on the Stability of Patient-Specific CAD/CAM Mandibular Reconstruction Plates: A Comparison Between Selective Laser Melted, Milled, and Hand-Bent Plates.

Authors:  Robin Kasper; Karsten Winter; Sebastian Pietzka; Alexander Schramm; Frank Wilde
Journal:  Craniomaxillofac Trauma Reconstr       Date:  2020-08-28

5.  Customized mandibular reconstruction plates improve mechanical performance in a mandibular reconstruction model.

Authors:  Ralf Gutwald; Raimund Jaeger; Floor M Lambers
Journal:  Comput Methods Biomech Biomed Engin       Date:  2016-11-25       Impact factor: 1.763

6.  A small number of residual teeth after the mandibular resection of oral cancer is associated with titanium reconstruction plate exposure.

Authors:  Hiromi Hirohata; Toru Yanagawa; Shohei Takaoka; Kenji Yamagata; Kaoru Sasaki; Yoichiro Shibuya; Fumihiko Uchida; Satoshi Fukuzawa; Katsuhiko Tabuchi; Shogo Hasegawa; Naomi Ishibashi-Kanno; Mitsuru Sekido; Hiroki Bukawa
Journal:  Clin Exp Dent Res       Date:  2019-06-07

7.  The Use of Customized Three-Dimensionally Printed Mandible Prostheses with a Pressure-Reducing Device: A Finite Element Analysis in Different Chewing Positions, Biomechanical Testing, and In Vivo Animal Study Using Lanyu Pigs.

Authors:  Chun-Feng Chen; Chun-Ming Chen; Han-Sheng Chen; Wei-Chin Huang; Yung-Chung Chen; Hung-Chih Chang; Sung-Ho Liu; Tsung-Lung Yang; Ling-Lin Wang; Ping-Ho Chen
Journal:  Biomed Res Int       Date:  2022-03-16       Impact factor: 3.411

8.  Pre-contoured reconstruction plate fabricated via three-dimensional printed bending support.

Authors:  In-Seok Song; Jae-Jun Ryu; Young-Jun Choi; Ui-Lyong Lee
Journal:  J Korean Assoc Oral Maxillofac Surg       Date:  2021-06-30

9.  Contour identical implants to bridge mandibular continuity defects--individually generated by LaserCUSING®--A feasibility study in animal cadavers.

Authors:  Bernd Reitemeier; Christine Schöne; Raoul Lesche; Günter Lauer; Matthias C Schulz; Jutta Markwardt
Journal:  Head Face Med       Date:  2016-04-11       Impact factor: 2.151

10.  Prevention of Mandible Reconstruction Plate Exposure by Costal Cartilage Wrapping.

Authors:  Motonao Iwasawa; Yoshito Mishima; Miho Ohtsubo
Journal:  Plast Reconstr Surg Glob Open       Date:  2017-08-04
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.