Surface preparations for metal frameworks of composite resin veneered prostheses made with an adhesive opaque resin.

Bond strengths of a laboratory developed light-cured composite resin to dental casting alloys were evaluated with a new adhesive opaque resin. The metal specimens were type III gold, nickel-chromium, and cobalt-chromium alloys, while the surface treatments for bonding were heating, Sn plating, and ion coating. The cast metal specimens were "particle blasted" with aluminum oxide and were surface treated. Adhesive 4-META/MMA-TBB opaque resin was applied and a light-cured composite resin was placed over the opaque layer. The prepared specimens were thermocycled in water and shear bond strengths were recorded. The light-cured composite resin was bonded strongly to heated or Sn-plated type III alloy with 4-META/MMA-TBB opaque resin. Copper ion coating in a sputter coater was effective for all three alloys, with only slightly diminished bond strengths. These methods were satisfactory for making composite resin veneered prostheses.