Modeling anaerobic digestion of aquatic plants by rumen cultures: cattail as an example.

Despite of the significance of the anaerobic digestion of lignocellulosic materials, only a limited number of studies have been carried out to evaluate the lignocellulosic digestion kinetics, and information about the modeling of this process is limited. In this work, a mathematical model, based on the Anaerobic Digestion Model No.1 (ADM1), was developed to describe the anaerobic conversion of lignocellulose-rich aquatic plants, with cattail as an example, by rumen microbes. Cattail was fractionated into slowly hydrolysable fraction (SHF), readily hydrolysable fraction (RHF) and inert fraction in the model. The SHF was hydrolyzed by rumen microbes and resulted in the production of RHF. The SHF and RHF had different hydrolysis rates but both with surface-limiting kinetics. The rumen microbial population diversity, including the cattail-, butyrate-, acetate- and H(2)-degraders, was all incorporated in the model structure. Experiments were carried out to identify the parameters and to calibrate and validate this model. The simulation results match the experimental data, implying that the fractionation of cattail into two biodegradation parts, i.e., SHF and RHF, and modeling their hydrolysis rate with a surface-limiting kinetics were appropriate. The model was capable of simulating the anaerobic biodegradation of cattail by the rumen cultures.