Literature DB >> 19296485

Strong adsorbability of mercury ions on aniline/sulfoanisidine copolymer nanosorbents.

Xin-Gui Li1, Hao Feng, Mei-Rong Huang.   

Abstract

The highest Hg-ion adsorbance so far, namely up to 2063 mg g(-1), has been achieved by poly(aniline-co-5-sulfo-2-anisidine) nanosorbents. Sorption of Hg ions occurs mainly by redox and chelation mechanisms (see scheme), but also by ion exchange and physisorption.Poly(aniline (AN)-co-5-sulfo-2-anisidine (SA)) nanoparticles were synthesized by chemical oxidative copolymerization of AN and SA monomers, and their extremely strong adsorption of mercury ions in aqueous solution was demonstrated. The reactivity ratios of AN and SA comonomers were found to be 2.05 and 0.02, respectively. While AN monomer tends to homopolymerize, SA monomer tends to copolymerize with AN monomer because of the great steric hindrance and electron-attracting effect of the sulfo groups, despite the effect of conjugation of the methoxyl group with the benzene ring. The effects of initial mercury(II) concentration, sorption time, sorption temperature, ultrasonic treatment, and sorbent dosage on mercury-ion sorption onto AN/SA (50/50) copolymer nanoparticles with a number-average diameter of around 120 nm were significantly optimized. The results show that the maximum Hg-ion sorption capacity on the particulate nanosorbents can even reach 2063 mg of Hg per gram of sorbent, which would be the highest Hg-ion adsorbance so far. The sorption data fit to the Langmuir isotherm, and the process obeys pseudo-second-order kinetics. The IR and UV/Vis spectral data of the Hg-loaded copolymer particles suggest that some mercury(II) was directly reduced by the copolymer to mercury(I) and even mercury(0). A mechanism of sorption between the particles and Hg ions in aqueous solution is proposed, and a physical/ion exchange/chelation/redox sorption ratio of around 2/3/45/50 was found. Copolymer nanoparticles may be one of the most powerful and cost-effective sorbents of mercury ions, with a wide range of potential applications for the efficient removal and even recovery of the mercury ions from aqueous solution.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19296485     DOI: 10.1002/chem.200802431

Source DB:  PubMed          Journal:  Chemistry        ISSN: 0947-6539            Impact factor:   5.236


  5 in total

1.  Efficient photocatalytic removal of safarnin-O dye pollutants from water under sunlight using synthetic bentonite/polyaniline@Ni2O3 photocatalyst of enhanced properties.

Authors:  Mostafa R Abukhadra; Mohamed Shaban; Fatma Sayed; Islam Saad
Journal:  Environ Sci Pollut Res Int       Date:  2018-09-25       Impact factor: 4.223

Review 2.  Review on nanoadsorbents: a solution for heavy metal removal from wastewater.

Authors:  Vinni Novi Thekkudan; Vinoth Kumar Vaidyanathan; Senthil Kumar Ponnusamy; Christy Charles; SaiLavanyaa Sundar; Dhanya Vishnu; Saravanan Anbalagan; Vasanth Kumar Vaithyanathan; Sivanesan Subramanian
Journal:  IET Nanobiotechnol       Date:  2017-04       Impact factor: 1.847

3.  Advanced material and approach for metal ions removal from aqueous solutions.

Authors:  Petri A Turhanen; Jouko J Vepsäläinen; Sirpa Peräniemi
Journal:  Sci Rep       Date:  2015-03-11       Impact factor: 4.379

4.  CuFe2O4/Polyaniline (PANI) Nanocomposite for the Hazard Mercuric Ion Removal: Synthesis, Characterization, and Adsorption Properties Study.

Authors:  Saad S M Hassan; Ayman H Kamel; Amr A Hassan; Abd El-Galil E Amr; Heba Abd El-Naby; Mohamed A Al-Omar; Ahmed Y A Sayed
Journal:  Molecules       Date:  2020-06-12       Impact factor: 4.411

Review 5.  Influence of Selective Conditions on Various Composite Sorbents for Enhanced Removal of Copper (II) Ions from Aqueous Environments.

Authors:  Rebecca O Adeeyo; Joshua N Edokpayi; Olugbenga S Bello; Adeyemi O Adeeyo; John O Odiyo
Journal:  Int J Environ Res Public Health       Date:  2019-11-20       Impact factor: 3.390

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.