Literature DB >> 19223066

SEM observations of porcelain Y-TZP interface.

Michael J Tholey1, Michael V Swain, Norbert Thiel.   

Abstract

OBJECTIVES: The metastability of the tetragonal phase of yttria tetragonal zirconia polycrystalline (Y-TZP) ceramics is a cause for concern in dental crown and bridge applications. One specific problematic area is the nature of the interface between the veneering porcelain and the Y-TZP framework and whether the associated preparation procedures and reactions result in a reduction of the stability of the zirconia.
METHODS: To investigate this aspect, high-resolution SEM observations were made of polished and etched (HF content gel) cross-sections of the interface area. Dry and moist veneering porcelain powders were built up on the zirconia base.
RESULTS: In some instances the zirconia grains at the interface appear to show multiplicity of subgrain faceting whereas in other instances they do not. The latter indicate destabilisation of the tetragonal phase occurs and in addition that the porcelain veneering material wets and some dissolution of the Y-TZP occurs. SIGNIFICANCE: These results and their relevance to the long-term stability of the interface adhesion to the veneering porcelain as well as possible tetragonal to monoclinic crystal transformations at the interface are discussed.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19223066     DOI: 10.1016/j.dental.2009.01.006

Source DB:  PubMed          Journal:  Dent Mater        ISSN: 0109-5641            Impact factor:   5.304


  12 in total

1.  Confocal Raman microscopy and SEM/EDS investigations of the interface between the zirconia core and veneering ceramic: the influence of a liner and regeneration firing.

Authors:  Jean-Cédric Durand; Bruno Jacquot; Hamideh Salehi; Jacques Margerit; Frédéric J G Cuisinier
Journal:  J Mater Sci Mater Med       Date:  2012-03-24       Impact factor: 3.896

Review 2.  Performance of dental ceramics: challenges for improvements.

Authors:  E D Rekow; N R F A Silva; P G Coelho; Y Zhang; P Guess; V P Thompson
Journal:  J Dent Res       Date:  2011-01-11       Impact factor: 6.116

3.  Flexural strength and failure modes of layered ceramic structures.

Authors:  Márcia Borba; Maico D de Araújo; Erick de Lima; Humberto N Yoshimura; Paulo F Cesar; Jason A Griggs; Alvaro Della Bona
Journal:  Dent Mater       Date:  2011-10-06       Impact factor: 5.304

4.  The zirconia ceramic: strengths and weaknesses.

Authors:  Elie E Daou
Journal:  Open Dent J       Date:  2014-04-18

Review 5.  The effect of surface roughness on ceramics used in dentistry: A review of literature.

Authors:  Haroon Rashid
Journal:  Eur J Dent       Date:  2014-10

6.  Comparison of the bond strength of ceramics to Co-Cr alloys made by casting and selective laser melting.

Authors:  Shirin Lawaf; Shahbaz Nasermostofi; Mahtasadat Afradeh; Arash Azizi
Journal:  J Adv Prosthodont       Date:  2017-02-07       Impact factor: 1.904

7.  Effect of ceramic cooling protocols and zirconia coloring on fracture load of zirconia-based restorations.

Authors:  Behnaz Ebadian; Ramin Mosharraf; Mahsa Abbasi
Journal:  Dent Res J (Isfahan)       Date:  2018 Jan-Feb

8.  Cytotoxicity and biocompatibility of Zirconia (Y-TZP) posts with various dental cements.

Authors:  Hyeongsoon Shin; Hyunjung Ko; Miri Kim
Journal:  Restor Dent Endod       Date:  2016-05-30

9.  Pre-sintered Y-TZP sandblasting: effect on surface roughness, phase transformation, and Y-TZP/veneer bond strength.

Authors:  Carla Müller Ramos-Tonello; Bruno Freitas Trevizo; Raphaela Farias Rodrigues; Ana Paula Rodrigues Magalhães; Adilson Yoshio Furuse; Paulo Noronha Lisboa-Filho; Americo Sheitiro Tabata; Ana Flávia Sanches Borges
Journal:  J Appl Oral Sci       Date:  2017 Nov-Dec       Impact factor: 2.698

10.  The Application of a Novel Ceramic Liner Improves Bonding between Zirconia and Veneering Porcelain.

Authors:  Hee-Sung Lee; Tae-Yub Kwon
Journal:  Materials (Basel)       Date:  2017-09-02       Impact factor: 3.623

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.