Literature DB >> 19217355

A quantitative three-dimensional dose attenuation analysis around Fletcher-Suit-Delclos due to stainless steel tube for high-dose-rate brachytherapy by Monte Carlo calculations.

E Ishmael Parsai1, Zhengdong Zhang, John J Feldmeier.   

Abstract

PURPOSE: The commercially available brachytherapy treatment-planning systems today, usually neglects the attenuation effect from stainless steel (SS) tube when Fletcher-Suit-Delclos (FSD) is used in treatment of cervical and endometrial cancers. This could lead to potential inaccuracies in computing dwell times and dose distribution. A more accurate analysis quantifying the level of attenuation for high-dose-rate (HDR) iridium 192 radionuclide ((192)Ir) source is presented through Monte Carlo simulation verified by measurement. METHODS AND MATERIALS: In this investigation a general Monte Carlo N-Particles (MCNP) transport code was used to construct a typical geometry of FSD through simulation and compare the doses delivered to point A in Manchester System with and without the SS tubing. A quantitative assessment of inaccuracies in delivered dose vs. the computed dose is presented. In addition, this investigation expanded to examine the attenuation-corrected radial and anisotropy dose functions in a form parallel to the updated AAPM Task Group No. 43 Report (AAPM TG-43) formalism. This will delineate quantitatively the inaccuracies in dose distributions in three-dimensional space. The changes in dose deposition and distribution caused by increased attenuation coefficient resulted from presence of SS are quantified using MCNP Monte Carlo simulations in coupled photon/electron transport. The source geometry was that of the Vari Source wire model VS2000. The FSD was that of the Varian medical system. In this model, the bending angles of tandem and colpostats are 15 degrees and 120 degrees , respectively. We assigned 10 dwell positions to the tandem and 4 dwell positions to right and left colpostats or ovoids to represent a typical treatment case. Typical dose delivered to point A was determined according to Manchester dosimetry system. RESULTS AND
CONCLUSIONS: Based on our computations, the reduction of dose to point A was shown to be at least 3%. So this effect presented by SS-FSD systems on patient dose is of concern.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19217355     DOI: 10.1016/j.brachy.2008.11.012

Source DB:  PubMed          Journal:  Brachytherapy        ISSN: 1538-4721            Impact factor:   2.362


  3 in total

1.  Independent evaluation of an in-house brachytherapy treatment planning system using simulation, measurement and calculation methods.

Authors:  M A Mosleh Shirazi; R Faghihi; Z Siavashpour; H A Nedaie; S Mehdizadeh; S Sina
Journal:  J Appl Clin Med Phys       Date:  2012-03-08       Impact factor: 2.102

2.  Dosimetric analysis of intracavitary brachytherapy applicators: a practical study.

Authors:  Aijaz A Khan; Anuj Vijay; Shaqul Qamar Wani; Malik M Haq
Journal:  Radiat Oncol J       Date:  2022-09-08

3.  Physics-aspects of dose accuracy in high dose rate (HDR) brachytherapy: source dosimetry, treatment planning, equipment performance and in vivo verification techniques.

Authors:  Antony Palmer; David Bradley; Andrew Nisbet
Journal:  J Contemp Brachytherapy       Date:  2012-06-30
  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.