Semi-analytical finite element analysis of elastic waveguides subjected to axial loads.

Predicting the influence of axial loads on the wave propagation in structures such as rails requires numerical analysis. Conventional three-dimensional finite element analysis has previously been applied to this problem. The process is tedious as it requires that a number of different length models be solved and that the user identify the computed modes of propagation. In this paper, the more specialised semi-analytical finite element method is extended to account for the effect of axial load. The semi-analytical finite element method includes the wave propagation as a complex exponential in the element formulation and therefore only a two-dimensional mesh of the cross-section of the waveguide is required. It was found that the stiffness matrix required to describe the effect of axial load is proportional to the mass matrix, which makes the extension to existing software trivial. The method was verified by application to an aluminium rod, where after phase and group velocities of propagating waves in a rail were computed to demonstrate the method.