Cross-sectional study of kidney stones by laser-induced breakdown spectroscopy.

We performed laser-induced breakdown spectroscopy (LIBS) for the in situ quantitative estimation of elemental constituents distributed in different parts of kidney stones obtained directly from patients by surgery. We did this by focusing the laser light directly on the center, shell, and surface of the stones to find the spatial distribution of the elements inside the stone. The elements detected in the stones were calcium, magnesium, manganese, copper, iron, zinc, strontium, sodium, potassium, carbon, hydrogen, nitrogen, oxygen, phosphorus, sulfur, and chlorine (Cl), etc. We optimized the LIBS signals by varying the laser energy from 10 mJ to 40 mJ to obtain the best signal-to-background and signal-to-noise ratios. We estimated the quantities of different elements in the stones by drawing calibration curves, plotting graphs of the analyte signal versus the absolute concentration of the elements in standard samples. The detection limits of the calibration curves were discussed. The concentrations of the different elements were found to be widely different in different stones found in different age groups of patients. It was observed that stones containing higher amounts of copper also possessed higher amounts of zinc. In general, the concentrations of trace elements present in the kidney stones decreased as we moved from center to shell and surface. Our results also revealed that the concentrations of elements present in the stones increased with the age of the patients. The results obtained from the calibration curves were compared with results from inductively coupled plasma mass spectrometry (ICP-MS). We also used the intensity ratios of different elemental lines to find the spatial distribution of different elements inside the kidney stones.