Literature DB >> 19081742

Nanoscale Patterning in Crosslinked Methacrylate Copolymer Networks: An Atomic Force Microscopy Study.

Qiang Ye1, Paulette Spencer, Yong Wang.   

Abstract

To understand the properties of materials, their phase structure must be established. It has been difficult in previous work to visualize the heterogeneous cross-linked structure of methacrylate-based networks. In this work, nano-sized phases with worm-like features were detected in the surfaces of model crosslinked methacrylate copolymer containing hydrophobic/hydrophilic co-mono-mers using tapping mode atomic force microscopy/phase imaging technique. The effects of different surface-contact covers on the height and phase-contrast images of model resin surfaces were also studied. Based on the experimental data, the identification of phase domains was proposed.

Entities:  

Year:  2007        PMID: 19081742      PMCID: PMC2600546          DOI: 10.1002/app.27044

Source DB:  PubMed          Journal:  J Appl Polym Sci Symp        ISSN: 0271-9460


  9 in total

1.  Micromechanics of the dentin/adhesive interface.

Authors:  J L Katz; S Bumrerraj; J Dreyfuss; Y Wang; P Spencer
Journal:  J Biomed Mater Res       Date:  2001

2.  Adhesive phase separation at the dentin interface under wet bonding conditions.

Authors:  Paulette Spencer; Yong Wang
Journal:  J Biomed Mater Res       Date:  2002-12-05

3.  Initiated chemical vapor deposition of linear and cross-linked poly(2-hydroxyethyl methacrylate) for use as thin-film hydrogels.

Authors:  Kelvin Chan; Karen K Gleason
Journal:  Langmuir       Date:  2005-09-13       Impact factor: 3.882

4.  Surface structures and properties of polystyrene/poly(methyl methacrylate) blends and copolymers.

Authors:  William C Johnson; Jie Wang; Zhan Chen
Journal:  J Phys Chem B       Date:  2005-04-07       Impact factor: 2.991

5.  Microphase separation at the surface of block copolymers, as studied with atomic force microscopy.

Authors: 
Journal:  Colloids Surf B Biointerfaces       Date:  2000-12-30       Impact factor: 5.268

6.  Relationship of solvent to the photopolymerization process, properties, and structure in model dentin adhesives.

Authors:  Qiang Ye; Paulette Spencer; Yong Wang; Anil Misra
Journal:  J Biomed Mater Res A       Date:  2007-02       Impact factor: 4.396

7.  Real-time observation of lamellar branching induced by an AFM tip and the stability of induced nuclei.

Authors:  Yong Wang; Chi-Ming Chan; Kai-Mo Ng; Yong Jiang; Lin Li
Journal:  Langmuir       Date:  2004-09-14       Impact factor: 3.882

8.  Nanophase separation and hindered glass transition in side-chain polymers.

Authors:  Mario Beiner; Heiko Huth
Journal:  Nat Mater       Date:  2003-08-24       Impact factor: 43.841

9.  Acid-base properties of adhesive dental polymers.

Authors:  M Morra
Journal:  Dent Mater       Date:  1993-11       Impact factor: 5.304

  9 in total
  10 in total

1.  Durable bonds at the adhesive/dentin interface: an impossible mission or simply a moving target?

Authors:  Paulette Spencer; Qiang Ye Jonggu Park; Anil Misra; Brenda S Bohaty; Viraj Singh; Ranga Parthasarathy; Fábio Sene; Sérgio Eduardo de Paiva Gonçalves; Jennifer Laurence
Journal:  Braz Dent Sci       Date:  2012-01

Review 2.  Adhesive/Dentin interface: the weak link in the composite restoration.

Authors:  Paulette Spencer; Qiang Ye; Jonggu Park; Elizabeth M Topp; Anil Misra; Orestes Marangos; Yong Wang; Brenda S Bohaty; Viraj Singh; Fabio Sene; John Eslick; Kyle Camarda; J Lawrence Katz
Journal:  Ann Biomed Eng       Date:  2010-02-27       Impact factor: 3.934

3.  Development of methacrylate/silorane hybrid monomer system: Relationship between photopolymerization behavior and dynamic mechanical properties.

Authors:  Linyong Song; Qiang Ye; Xueping Ge; Viraj Singh; Anil Misra; Jennifer S Laurence; Cindy L Berrie; Paulette Spencer
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2015-05-07       Impact factor: 3.368

4.  Influence of different initiators on the degree of conversion of experimental adhesive blends in relation to their hydrophilicity and solvent content.

Authors:  Milena Cadenaro; Francesca Antoniolli; Barbara Codan; Kelli Agee; Franklin R Tay; Elettra De Stefano Dorigo; David H Pashley; Lorenzo Breschi
Journal:  Dent Mater       Date:  2009-12-16       Impact factor: 5.304

5.  Dynamic mechanical analysis and esterase degradation of dentin adhesives containing a branched methacrylate.

Authors:  Jong-Gu Park; Qiang Ye; Elizabeth M Topp; Chi H Lee; Elisabet L Kostoryz; Anil Misra; Paulette Spencer
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2009-10       Impact factor: 3.368

6.  Nanophase separation of polymers exposed to simulated bonding conditions.

Authors:  Qiang Ye; Yong Wang; Paulette Spencer
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2009-02       Impact factor: 3.368

7.  Effect of photoinitiator system and water content on dynamic mechanical properties of a light-cured bisGMA/HEMA dental resin.

Authors:  Jonggu Park; Qiang Ye; Elizabeth M Topp; Anil Misra; Sarah L Kieweg; Paulette Spencer
Journal:  J Biomed Mater Res A       Date:  2010-06-15       Impact factor: 4.396

8.  In vitro performance of nano-heterogeneous dentin adhesive.

Authors:  Q Ye; J G Park; E Topp; Y Wang; A Misra; P Spencer
Journal:  J Dent Res       Date:  2008-09       Impact factor: 6.116

9.  Enzymatic biodegradation of HEMA/bisGMA adhesives formulated with different water content.

Authors:  Elisabet L Kostoryz; Kiran Dharmala; Qiang Ye; Yong Wang; Jesse Huber; Jong-Gu Park; Grant Snider; J Lawrence Katz; Paulette Spencer
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2009-02       Impact factor: 3.368

10.  Effect of photoinitiators on the in vitro performance of a dentin adhesive exposed to simulated oral environment.

Authors:  Qiang Ye; Jonggu Park; Elizabeth Topp; Paulette Spencer
Journal:  Dent Mater       Date:  2008-11-22       Impact factor: 5.304

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.