Study of Pd(II) adsorption over titanate nanotubes of different diameters.

Hydrogenotitanates (HNTs) nanotubes with different diameters were prepared by hydrothermal treatment of TiO(2) (P25) followed by washing with HCl aqueous solution. The prepared samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermal analysis and N(2) adsorption/desorption. In order to determine the palladium uptake ability of different HNT samples, the interaction between HNTs and Pd(II) was subsequently studied in aqueous solution at pH 9 (NH(+)(4)/NH(3) buffer). Transmission electron microscopy showed that the diameter of the nanotubes depends on the preparation conditions. Chemical analysis of residual sodium and thermal studies showed that the chemical formula of the two prepared HNT was H(x)Na(2-x)Ti(2)O(5)H(2)O with x=1.61 or 1.65. The HNTs are mesoporous materials with a multi-walled nanotubular structure and high specific surface area. In order to determine the capacity of palladium retention of different HNTs samples, the interaction between HNTs and Pd(II) was subsequently studied in aqueous solution at pH 9 (NH(+)(4)/NH(3) buffer). The adsorption kinetics of Pd(II) on the HNTs was very fast. The isotherms of Pd(II) on the HNTs showed that the adsorption occurred (1) initially through cationic exchange and (2) when the concentration of Pd(II) is high by precipitation of different Pd salts. The adsorption capacity of Pd(II) is strongly altered by the morphology of the HNTs samples.