Literature DB >> 18976832

X-ray absorption and photoelectron spectroscopy investigation of selenite reduction by FeII-bearing minerals.

Andreas C Scheinost1, Regina Kirsch, Dipanjan Banerjee, Alejandro Fernandez-Martinez, Harald Zaenker, Harald Funke, Laurent Charlet.   

Abstract

The long-lived radionuclide 79Se is one of the elements of concern for the safe storage of high-level nuclear waste, since clay minerals in engineered barriers and natural aquifer sediments strongly adsorb cationic species, but to lesser extent anions like selenate (SeVIO4(2-)) and selenite (SeIVO3(2-)). Previous investigations have demonstrated, however, that SeIV and SeVI are reduced by surface-associated FeII, thereby forming insoluble Se0 and Fe selenides. Here we show that the mixed FeII/III (hydr)oxides green rust and magnetite, and the FeII sulfide mackinawite reduce selenite rapidly (< 1 day) to FeSe, while the slightly slower reduction by the FeII carbonate siderite produces elemental Se. In the case of mackinawite, both S(-II) and FeII surface atoms are oxidized at a ratio of one to four by producing a defective mackinawite surface. Comparison of these spectroscopic results with thermodynamic equilibrium modeling provides evidence that the nature of reduction end product in these FeII systems is controlled by the concentration of HSe(-); Se0 forms only at lower HSe(-) concentrations related to slower HSeO3(-) reduction kinetics. Even under thermodynamically unstable conditions, the initially formed Se solid phases may remain stable for longer periods since their low solubility prevents the dissolution required for a phase transformation into more stable solids. The reduction by Fe2+-montmorillonite is generally much slower and restricted to a pH range, where selenite is adsorbed (pH < 7), stressing the importance of a heterogeneous, surface-enhanced electron transfer reaction. Although the solids precipitated by the redox reaction are nanocrystalline, their solubility remains below 6.3 x 10(-8) M. No evidence for aqueous metal selenide colloids nor for Se sorption to colloidal phases was found. Since FeII phases like the ones investigated here should be ubiquitous in the near field of nuclear waste disposals as well as in the surrounding aquifers, mobility of the fission product 79Se may be much lower than previously assumed.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18976832     DOI: 10.1016/j.jconhyd.2008.09.018

Source DB:  PubMed          Journal:  J Contam Hydrol        ISSN: 0169-7722            Impact factor:   3.188


  5 in total

1.  Effects of Corrosion Products Deposited on 304 Stainless Steel on Reduction of Se (IV/VI) in Simulated Groundwater.

Authors:  Guokai Huang; Teng Li; Xian Zhang; Lingyu Wang; Daqing Cui; Miao Yang
Journal:  Materials (Basel)       Date:  2022-04-07       Impact factor: 3.748

2.  Iron anode mediated transformation of selenate in sand columns.

Authors:  Kitae Baek; Ali Ciblak; Xuhui Mao; Eun-Jung Kim; Akram Alshawabkeh
Journal:  Water Res       Date:  2013-08-28       Impact factor: 11.236

3.  Microbial transformations of selenite by methane-oxidizing bacteria.

Authors:  Abdurrahman S Eswayah; Thomas J Smith; Andreas C Scheinost; Nicole Hondow; Philip H E Gardiner
Journal:  Appl Microbiol Biotechnol       Date:  2017-06-23       Impact factor: 4.813

4.  Methyl Selenol as a Precursor in Selenite Reduction to Se/S Species by Methane-Oxidizing Bacteria.

Authors:  Abdurrahman S Eswayah; Nicole Hondow; Andreas C Scheinost; Mohamed Merroun; Maria Romero-González; Thomas J Smith; Philip H E Gardiner
Journal:  Appl Environ Microbiol       Date:  2019-10-30       Impact factor: 4.792

5.  Conceptual and numerical modeling of radionuclide transport and retention in near-surface systems.

Authors:  Àngels Piqué; David Arcos; Fidel Grandia; Jorge Molinero; Lara Duro; Sten Berglund
Journal:  Ambio       Date:  2013-05       Impact factor: 5.129

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.