Automatic on line preconcentration and determination of lead in water by ICP-AES using a TS-microcolumn.

A simple, sensitive, low-cost and rapid, flow injection system for the on-line preconcentration of lead by sorption on a microcolumn packed with silica gel funtionalized with methylthiosalicylate (TS-gel) was developped. The metal is directly retained on the sorbent column and subsequently then eluted from it by EDTA. Five variables (sample flow rate, eluent flow rate, eluent concentration, pH and buffer concentration) were considered as factors in the optimization process. Interactions between analytical factors and their optimal levels were investigated using two level factorial and Box-Behnken designs. The optimum conditions established were applied to the determination of lead by flow injection inductively coupled plasma atomic emission spectrometry (FI-ICP-AES). The proposed method has a linear calibration range from 10 to at least 500ngml(-1) of lead. At a sample frequency of 24h(-1) and a 120s preconcentration time, the enrichment factor was 41, the detection limit was 15.3ngml(-1) (S/N=3) and the precision, expressed as relative standard deviation, was 0.9% (at 100ngml(-1)). Validation of the developed method was carried out against electrothermal atomic absorption spectrometry analysis without statistically significant differences between the proposed method and the atomic absorption method.