Rapid sample digestion by fusion and chemical separation of Hf for isotopic analysis by MC-ICPMS.

A new method for rapid sample digestion and efficient chemical separation of Hf and REE from rock samples for precise isotopic analysis is presented. Samples are digested by fusion in the presence of a lithium borate flux at 1100 degrees C and dissolved whilst molten in dilute nitric or hydrochloric acid. Prior to chemical separation using ion exchange techniques, Li and B from the flux material and Si from the sample are separated from the remaining major elements, REE and high field strength elements (HFSE) in the sample by Fe-hydroxide co-precipitation. The chemical separation of Hf is a two-stage procedure designed to first remove the remaining matrix elements (e.g. Fe, Ba) in the sample using standard cation exchange techniques, followed by separation of Hf from the REE and HFSE on TEVA extraction chromatographic resin. Hf yields are >90% and total procedural blanks are ca. 50 pg. Hf isotope ratios of a synthetic standard solution and replicate digestions of international rock standards BHVO-1 and BCR-1 measured on multi-collector inductively coupled plasma mass spectrometer (MC-ICPMS) reproduce similarly to </=50 ppm (2 S.D.). The following elemental ratios are routinely obtained for elements, which interfere isobarically or may affect the ionisation and/or fractionation behaviour of Hf during analysis: (176)Yb/(176)Hf<0.0001; (176)Lu/(176)Hf<0.00001; Ti/Hf<0.05. This technique also provides a means of separating Nd from the REE fraction for isotopic analysis and, potentially, may be adapted for measurement of Lu/Hf ratios by isotope dilution techniques.