Literature DB >> 18936833

A quantum dot-lucigenin probe for Cl-.

Maria Jose Ruedas-Rama1, Elizabeth A H Hall.   

Abstract

In this work, the first chloride ion sensor based on QD-lucigenin nanoparticles is reported. The mechanism uses the ability of semiconductor QDs to engage in short range exchange processes, leading to fluorescence changes. An acridinium dication (lucigenin) which is an electron acceptor, was self-assembled on the surface of negative charged QDs (capped with mercaptopropionic acid). Mutual quenching of the lucigenin and QD were observed. From a sphere of action, Perrin-type model, exchange was estimated to occur over a range of the order of 2 nm. The possibility of spin-orbit coupling (SOC) or electron transfer between the QD and the lucigenin dication (Luc(2+)) is discussed. The radical cation Luc(+*) was not identified, but electron transfer from the QD conduction band to the Luc(2+), then electron transfer back, from the Luc(+*) to the QD valence band, could lead to mutual quenching, without build up of Luc(+*) . SOC between the QD and lucigenin, with or without charge transfer being involved, can also account for the results obtained. Lucigenin is also a chloride-sensitive indicator dye, with a sensing mechanism based on SOC. In the QD-MPA-lucigenin conjugate luminescence is restored by adding chloride ion. Thus, the presence of chloride is transduced into an enhancement of the luminescence of QDs. Using this operating principle, a chloride ion sensor based on CdSe-ZnS core-shell QD nanoparticles, showed a very good linearity in the range 1-250 mM, with a detection limit 0.29 mM and a RSD of 2.5% (n = 10). In a study of interferences, the chloride sensitive QDs showed good selectivity to most of the other anions tested. The versatility of the system was also demonstrated in terms of fluorescent emission wavelength, which could be selected across a wide range through choice of QDs. Examples are shown for lambda(max) = 500, 540 and 620 nm. The results from samples mimicking physiological conditions suggested very good applicability in the determination of chloride ion in physiological samples.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18936833     DOI: 10.1039/b801507d

Source DB:  PubMed          Journal:  Analyst        ISSN: 0003-2654            Impact factor:   4.616


  5 in total

1.  Room-Temperature Phosphorescence Turn-on Detection of DNA Based on Riboflavin-Modulated Manganese Doped Zinc Sulfide Quantum Dots.

Authors:  Yan Gong; Zhefeng Fan
Journal:  J Fluoresc       Date:  2015-12-14       Impact factor: 2.217

2.  Fluorescence Characteristics of Aqueous Synthesized Tin Oxide Quantum Dots for the Detection of Heavy Metal Ions in Contaminated Water.

Authors:  Jianqiao Liu; Qianru Zhang; Weiting Xue; Haipeng Zhang; Yu Bai; Liting Wu; Zhaoxia Zhai; Guohua Jin
Journal:  Nanomaterials (Basel)       Date:  2019-09-10       Impact factor: 5.076

3.  Upconversion nanoparticles as intracellular pH messengers.

Authors:  Evaline S Tsai; Fadwa Joud; Lisa M Wiesholler; Thomas Hirsch; Elizabeth A H Hall
Journal:  Anal Bioanal Chem       Date:  2020-07-02       Impact factor: 4.142

4.  Effective and Efficient Pretreatment of Polyimide Substrates by Capacitively Coupled Plasma for Coating the Composites of Tetracycline-Imprinted Polymers and Quantum Dots: Comparison with Chemical Pretreatment.

Authors:  Ching-Bin Ke; Jian-Lian Chen
Journal:  Sensors (Basel)       Date:  2020-05-10       Impact factor: 3.576

5.  A Quantum Dot-Based FLIM Glucose Nanosensor.

Authors:  Consuelo Ripoll; Angel Orte; Lorena Paniza; Maria Jose Ruedas-Rama
Journal:  Sensors (Basel)       Date:  2019-11-16       Impact factor: 3.576

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.