Automated bone marrow analysis using the CD4000 automated haematology analyser.

At present, bone marrow analysis is performed microscopically, but is time consuming and labour intensive. No automated methods have been successfully applied to classification of bone marrows cells because automated blood cell analysers have been incapable of identifying erythroblasts. The present study was designed to evaluate automated analysis of bone marrow aspirates with the CELL-DYN 4000 (CD4000) haematology analyser, which enables automated determination of erythroblast counts in both the normal mode (haemolytic time; 11.5 s) and the resistant RBC mode (34.0 s). The percentages of subpopulations including lymphocytes, neutrophils and erythroblasts were obtained with the CD4000, and as a reference, differential counts by microscopic observation of May-Grünwald-Giesa-stained films of bone marrow aspirates were performed (n=98). Significant correlations (P < 0.01) between the results obtained with the two methods were observed for total nucleated cell count and lymphocytes, neutrophils, erythroblasts and myeloid/erythroid (M/E) ratio. However, there were biases in the average percentages of erythroblasts, lymphocytes and M/E ratio obtained using the normal mode with the CD4000 toward values lower than those obtained with the microscopic method. Using the RBC resistant mode with the CD4000, the average percentages of erythroblasts, lymphocytes and M/E ratio approximated those obtained with the microscopic method. In conclusion, the CD4000 in resistant RBC mode is more useful for analysis of bone marrow aspirates than is the normal mode, because the former better approximates the M/E ratio than the latter.