Sorption of Pb(II), Cr(III), Cu(II), As(III) to peat, and utilization of the sorption properties in industrial waste landfill hydraulic barrier layers.

The low conductivity landfill barrier layers protect the groundwater and soil by limiting the water flow through the bottom layers of the landfill material. Many materials used in hydraulic barrier layers also have sorption properties which could be used to reduce environmental risks. The adsorption of lead, chromium, copper, and arsenic to peat was studied with a batch-type test and a column test for compacted peat, both without pH adjustment in acidic conditions. Peat adsorbed all the metals well, 40000mg/kg of lead, 13000mg/kg of chromium, and 8400mg/kg of copper in the column test. Arsenic was only tested in a batch-type test, and in that peat adsorbed 60mg/kg of arsenic. The column test showed heavy metals to be adsorbed on the surface layers of the compacted peat sample, on the first centimeter of the sample. The adsorption was much greater in the column test than in the batch-type test, partly due to the different pH conditions and the buffer capacity of the peat in the column test. The liquid/solid ratio of the column experiment represented a time period of approximately 40 years in a landfill, under Finnish climate conditions. The hydraulic conductivity of the peat decreased as it was compressed, but it already met the hydraulic conductivity limits set by European Union legislation for the hydraulic barrier layer (1x10(-9)m/s at a pressure of 150kPa for a 5-m layer), with a pressure of 50kPa. The results show that peat would be an excellent material to construct compacted, low hydraulic conductivity layers with adsorption properties in, e.g. industrial waste landfills.