Literature DB >> 18778929

Size distribution and number concentration of particles at the stack of a municipal waste incinerator.

G Buonanno1, G Ficco, L Stabile.   

Abstract

A large number of particles and gaseous products are generated by waste combustion processes. Of particular importance are the ultrafine particles (less than 0.1 microm in aerodynamic diameter) that are emitted in large quantities from all the combustion sources. Recent findings of toxicological and epidemiological studies indicate that fine and ultrafine particles could represent health and environmental risks. Quantifying particulate emissions from combustion sources is important: (i) to examine the source status in compliance with regulations; (ii) to create inventories of such emissions at local, regional and national levels, for developing appropriate management and control strategies in relation to air quality; (iii) to predict ambient air quality in the areas involved at the source and (iv) to perform source apportionment and exposure assessment for the human populations and/or ecological systems involved. In order to control and mitigate the particles in the view of health and environmental risk reduction, a good understanding of the relative and absolute contribution from the emission sources to the airborne concentrations is necessary. For these purposes, the concentration and size distribution of particles in terms of mass and number in a waste gas of a municipal waste incineration plant were measured in the stack gas. The mass concentrations obtained are well below the imposed daily threshold value for both incineration lines and the mass size distribution is on average very stable. The total number concentrations are between 1 x 10(5) and 2 x 10(5)particles/cm(3) and are on average relatively stable from one test to another. The measured values and the comparison with other point sources show a very low total number concentration of particles at the stack gas, revealing the importance of the flue gas treatment also for ultrafine particles. Also in respect to linear sources (high and light duty vehicles), the comparison shows a negligible emission in terms of the total number of particles.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18778929     DOI: 10.1016/j.wasman.2008.06.029

Source DB:  PubMed          Journal:  Waste Manag        ISSN: 0956-053X            Impact factor:   7.145


  4 in total

1.  Identifying potential environmental impacts of waste handling strategies in textile industry.

Authors:  Dalia M M Yacout; M S Hassouna
Journal:  Environ Monit Assess       Date:  2016-07-02       Impact factor: 2.513

Review 2.  Ultrafine Particles from Residential Biomass Combustion: A Review on Experimental Data and Toxicological Response.

Authors:  Emanuela Corsini; Marina Marinovich; Roberta Vecchi
Journal:  Int J Mol Sci       Date:  2019-10-09       Impact factor: 5.923

3.  Ecological Risk Assessment Related to the Presence and Toxicity of Potentially Toxic Elements in Ashes from Household Furnaces.

Authors:  Alicja Kicińska; Grzegorz Caba; Hubert Serwatka
Journal:  Int J Environ Res Public Health       Date:  2022-02-04       Impact factor: 3.390

4.  Estimating Particulate Exposure from Modern Municipal Waste Incinerators in Great Britain.

Authors:  Philippa Douglas; Anna Freni-Sterrantino; Maria Leal Sanchez; Danielle C Ashworth; Rebecca E Ghosh; Daniela Fecht; Anna Font; Marta Blangiardo; John Gulliver; Mireille B Toledano; Paul Elliott; Kees de Hoogh; Gary W Fuller; Anna L Hansell
Journal:  Environ Sci Technol       Date:  2017-06-16       Impact factor: 9.028

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.