Literature DB >> 18605558

Solubility and toxicity of antimony trioxide (Sb2O3) in soil.

Koen Oorts1, Erik Smolders, Fien Degryse, Jurgen Buekers, Gabriel Gascó, Geert Cornelis, Jelle Mertens.   

Abstract

Antimony trioxide (Sb2O3) is a widely used chemical that can be emitted to soil. The fate and toxicity of this poorly soluble compound in soil is insufficiently known. A silt-loam soil (pH 7.0, background 0.005 mmol Sb kg(-1)) was amended with Sb2O3 at various concentrations. More than 70% of Sb in soil solution was present as Sb(V) (antimonate) within 2 days. The soil solution Sb concentrations gradually increased between 2 and 35 days after Sb2O3 amendment but were always below that of soils amended with the more soluble SbCl3 at the lower Sb concentrations. The soil solution Sb concentrations in freshly amended SbCl3 soils (7 days equilibration) were equivalent to those in Sb2O3-amended soils equilibrated for 5 years at equivalent total soil Sb. Our data indicate that the Sb solubility in this soil was controlled by a combination of sorption on the soil surface, Sb precipitation at the higher doses, and slow dissolution of Sb2O3, the latter being modeled with a half-life ranging between 50 and 250 days. Toxicity of Sb to plant growth (root elongation of barley, shoot biomass of lettuce) or to nitrification was found in soil equilibrated with Sb2O3 (up to 82 mmol Sb kg(-1)) for 31 weeks with 10% inhibition values at soil solution Sb concentrations of 110 microM Sb or above. These concentrations are equivalent to 4.2 mmol Sb per kg soil (510 mg Sb kg(-1)) at complete dissolution of Sb2O3 in this soil. No toxicity to plant growth or nitrification was evident in toxicity tests starting one week after soil amendment with Sb2O3, whereas clear toxicity was found in a similar test using SbCl3. However, these effects were confounded by a decrease in pH and an increase in salinity. It is concluded that the Sb(V) toxicity thresholds are over 100-fold larger than background concentrations in soil and that care must be taken to interpret toxicity data of soluble Sb(III) forms due to confounding factors.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18605558     DOI: 10.1021/es703061t

Source DB:  PubMed          Journal:  Environ Sci Technol        ISSN: 0013-936X            Impact factor:   9.028


  4 in total

Review 1.  Availability, Toxicology and Medical Significance of Antimony.

Authors:  Argyrios Periferakis; Ana Caruntu; Aristodemos-Theodoros Periferakis; Andreea-Elena Scheau; Ioana Anca Badarau; Constantin Caruntu; Cristian Scheau
Journal:  Int J Environ Res Public Health       Date:  2022-04-12       Impact factor: 4.614

2.  Concentration and speciation of antimony and arsenic in soil profiles around the world's largest antimony metallurgical area in China.

Authors:  Hailin Yang; Mengchang He; Xiangqin Wang
Journal:  Environ Geochem Health       Date:  2014-06-27       Impact factor: 4.609

3.  Synthesis, Characterization, and Adsorptive Properties of Fe3O4/GO Nanocomposites for Antimony Removal.

Authors:  Xiuzhen Yang; Tengzhi Zhou; Bozhi Ren; Zhou Shi; Andrew Hursthouse
Journal:  J Anal Methods Chem       Date:  2017-07-20       Impact factor: 2.193

4.  Pilot-Scale Treatment of a Spent Uranium Catalyst Formally Used in the SOHIO Process: Pilot Plant Verification of the SENSEI Process.

Authors:  Richard I Foster; Maengkyo Oh; Keunyoung Lee; Kwang-Wook Kim
Journal:  ACS Omega       Date:  2020-05-08
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.