Enzymic hydrolysis of lignocellulosic materials: I. Models for the hydrolysis process--a theoretical study.

At the end of an enzymic hydrolysis process involving a solid lignocellulosic substrate, enzymes are found both in solution and absorbed to the substrate residue. Removal of residue from the system will result in loss of some of the enzymes, the extent of which will depend on the design of the process. To minimize enzyme loss, a study has been conducted in which six process models have been formulated and an enzyme loss function derived for each model based on the total amount of enzymes lost through residue removal. Model 1 is a reference model, characterized by an uninterrupted hydrolysis throughout the entire hydrolysis period. The residue is then washed in order to recover both sugar and adsorbed enzymes before the residue is discarded. Models 2-6 are all characterized by the removal of hydrolysate three times during the process, recirculation of dissolved and adsorbed enzymes to various points in the process and selection of a stage at which the residue is removed. The following conclusions could be drawn from the derived enzyme loss functions: Increased enzyme adsorption leads to increased enzyme loss.The enzyme loss decreases if the solid residue is removed late in the process.Both adsorbed and dissolved enzymes should be introduced at the starting point of the process. This is particularly important for dissolved enzymes. Three models were chosen for experimental studies, which are reported in a second, accompanying article. The experimental results obtained are compared with the theoretical study reported here.