Immobilized heparinase: In vitro reactor model.

Heparinase immobilized to agarose has previously been shown to be useful in degrading heparin and thereby preventing thromboembolytic complications when this anticoagulant has been used in extracorporeal perfusions. The current study examined the kinetics of this immobilized enzyme. When heparinase is covalently bound to 8% agarose, the partition coefficient of heparin in the catalytic particle is 0.36 +/- 0.048 (N = 10). The immobilized enzyme has a K(m) of 0.15 +/- 0.03 mg/mL and an activation energy of 10.3 +/- 0.57 kcal/gmol (N = 5). These values are statistically indistinguishable from the values for the free enzyme. The immobilized enzyme showed a pH activity optimum between 7.0 and 7.4, compared to the optimum pH of 6.5 for the soluble enzyme. The activity optimum of immobilized heparinase with respect to salt concentration was between 0 and 0.1M. A reactor containing immobilized heparinase recirculating internally at 1300 mL/min behaved as a continuously stirred tank reactor (CSTR) when solutions at a flow rate of 120 mL/min were passed through the device. The residence time distribution was determined using blue dextran (molecular weight 2 x 10(6) daltons), which is sterically excluded from the agarose catalyst. A model of the heparinase reactor based on ideal CSTR behavior and the immobilized enzyme kinetic parameters was developed. It accurately predicted experimental conversions over a range of catalyst volumes, enzyme loadings, and substrate concentrations to within 7% in most cases and with a maximum deviation of 13%.