Literature DB >> 18498579

Implant radiography and radiology.

P A Monsour1, R Dudhia.   

Abstract

The practitioner placing dental implants has many options with respect to pre-implant radiographic assessment of the jaws. The advantages and disadvantages of the imaging modalities currently available for pre-implant imaging are discussed in some detail. Intra-oral and extra-oral radiographs are generally low dose but the information provided is limited as the images are not three-dimensional. Tomography is three-dimensional, but the image quality is highly variable. Computed tomography (CT) has been the gold standard for many years as the information provided is three-dimensional and generally very accurate. However, CT examinations are expensive and deliver a relatively high radiation dose to the patient. The latest imaging modality introduced is cone beam volumetric tomography (CBVT) and this technology is very promising with regard to pre-implant imaging. CBVT generally delivers a lower dose to the patient than CT and provides reasonably sharp images with three-dimensional information. A comparison between CT and CBVT is provided. Magnetic resonance imaging is showing some promise, but the examinations are not readily available, generally expensive and bone is not well imaged. Magnetic resonance imaging is excellent for demonstrating soft tissues and therefore may be of great use in identifying the inferior dental nerve and vessels. All of the above technology is of little value if the information required is not obtained and so information is also provided on imaging of some of the vital structures. Of particular interest is the inferior dental canal, incisive canals of the mandible, genial foramina and canals, maxillary sinus and the incisive canal and foramen of the maxilla.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18498579     DOI: 10.1111/j.1834-7819.2008.00037.x

Source DB:  PubMed          Journal:  Aust Dent J        ISSN: 0045-0421            Impact factor:   2.291


  28 in total

1.  PETRA, MSVAT-SPACE and SEMAC sequences for metal artefact reduction in dental MR imaging.

Authors:  Tim Hilgenfeld; Marcel Prager; Alexander Heil; Franz Sebastian Schwindling; Mathias Nittka; David Grodzki; Peter Rammelsberg; Martin Bendszus; Sabine Heiland
Journal:  Eur Radiol       Date:  2017-07-11       Impact factor: 5.315

2.  Influence of 2D vs 3D imaging and professional experience on dental implant treatment planning.

Authors:  João Henrique Fortes; Christiano de Oliveira-Santos; Wilson Matsumoto; Raphael Jurca Gonçalves da Motta; Camila Tirapelli
Journal:  Clin Oral Investig       Date:  2018-06-16       Impact factor: 3.573

3.  Cone beam CT evaluation of the presence of anatomic accessory canals in the jaws.

Authors:  M Eshak; S Brooks; N Abdel-Wahed; P C Edwards
Journal:  Dentomaxillofac Radiol       Date:  2014-02-26       Impact factor: 2.419

Review 4.  Estimating bone mineral density using MRI in medicine and dentistry: a literature review.

Authors:  Danielle Ayumi Nishimura; Isabela Goulart Gil Choi; Emiko Saita Arita; Arthur Rodriguez Gonzalez Cortes
Journal:  Oral Radiol       Date:  2020-09-15       Impact factor: 1.852

5.  Visibility of the mandibular canal on CBCT cross-sectional images.

Authors:  Christiano Oliveira-Santos; Ana Lúcia Álvares Capelozza; Mariela Siqueira Gião Dezzoti; Cássia Maria Fischer; Marcelo Lupion Poleti; Izabel Regina Fischer Rubira-Bullen
Journal:  J Appl Oral Sci       Date:  2011 May-Jun       Impact factor: 2.698

6.  The prevalence and location of the posterior superior alveolar artery in the maxillary sinus wall: A preliminary computed-cone beam study.

Authors:  Kar-Yan Ang; Ky-Leigh Ang; Wei Cheong Ngeow
Journal:  Saudi Dent J       Date:  2022-08-31

7.  Location of maxillary intraosseous vascular anastomosis based on the tooth position and height of the residual alveolar bone: computed tomographic analysis.

Authors:  Seung-Min Yang; Seung-Beom Kye
Journal:  J Periodontal Implant Sci       Date:  2014-04-24       Impact factor: 2.614

8.  Using an existing denture to design a radiographic template for a two-implant mandibular overdenture.

Authors:  Guy Huynh-Ba; Peggy Alexander; Matthew J Vierra; Adriana Vargas; Thomas W Oates
Journal:  J Prosthet Dent       Date:  2013-01       Impact factor: 3.426

9.  Variability of dental cone beam CT grey values for density estimations.

Authors:  R Pauwels; O Nackaerts; N Bellaiche; H Stamatakis; K Tsiklakis; A Walker; H Bosmans; R Bogaerts; R Jacobs; K Horner
Journal:  Br J Radiol       Date:  2013-01       Impact factor: 3.039

10.  Accuracy and reliability of linear measurements using tangential projection and cone beam computed tomography.

Authors:  Mahnaz Sheikhi; Mansour Dakhil-Alian; Zahra Bahreinian
Journal:  Dent Res J (Isfahan)       Date:  2015 May-Jun
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.