Literature DB >> 18482376

The influence of footwear sole hardness on slip initiation in young adults.

Yi-Ju Tsai1, Christopher M Powers.   

Abstract

Slips occur when the friction demand of an individual exceeds the friction available from the shoe/floor interface. Shoe sole hardness is one of the factors thought to influence friction demand and available friction. The purpose of this study was to determine the influence of footwear sole hardness on the probability of slip initiation. Forty young adults were randomized into a hard or soft sole group. Slip events during the slippery floor trials were documented using a motion analysis system. The proportion of slip events in the hard sole group was greater than that in the soft sole group. The difference between utilized and available friction accurately predicted 90% of slip outcomes. Our data support the premise that individuals wearing shoes with harder soles are at greater risk for slipping. The results of this study suggest that shoe sole hardness should be considered when designing footwear aimed at decreasing slip risk.

Entities:  

Mesh:

Year:  2008        PMID: 18482376     DOI: 10.1111/j.1556-4029.2008.00739.x

Source DB:  PubMed          Journal:  J Forensic Sci        ISSN: 0022-1198            Impact factor:   1.832


  4 in total

1.  Predicting slips based on the STM 603 whole-footwear tribometer under different coefficient of friction testing conditions.

Authors:  Kurt E Beschorner; Arian Iraqi; Mark S Redfern; Rakié Cham; Yue Li
Journal:  Ergonomics       Date:  2019-02-26       Impact factor: 2.778

2.  Prediction of coefficient of friction based on footwear outsole features.

Authors:  Arian Iraqi; Natasa S Vidic; Mark S Redfern; Kurt E Beschorner
Journal:  Appl Ergon       Date:  2019-11-01       Impact factor: 3.661

3.  Coefficient of friction testing parameters influence the prediction of human slips.

Authors:  Arian Iraqi; Rakié Cham; Mark S Redfern; Kurt E Beschorner
Journal:  Appl Ergon       Date:  2018-03-20       Impact factor: 3.661

4.  Physical Property of 3D-Printed N-Pointed Star-Shaped Outsole Prepared by FDM 3D Printer Using the Lightweight TPU.

Authors:  Xiaokui Chen; Sunhee Lee
Journal:  Polymers (Basel)       Date:  2022-08-04       Impact factor: 4.967

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.