3D strain imaging using a rectilinear 2D array.

Under mechanical compression, tissue movements are inherently three-dimensional. 2-D strain imaging can suffer from decorrelation noise caused by out-of-plane tissue movement in elevation. With 3-D strain imaging, all tissue movements can be estimated and compensated, hence minimizing out-of-plane decorrelation noise. Promising 3-D strain imaging results have been shown using 1-D arrays with mechanical translation in elevation. However, the relatively large slice thickness and mechanical translation can degrade image quality. Using 2-D arrays, an improved elevational resolution can be achieved with electronic focusing. Furthermore, scanning with 2-D arrays is also done electronically, which eliminates the need for mechanical translation. In this paper, we demonstrate the feasibility of 3-D strain imaging using a 4 cm x 4 cm ultrasonic sparse rectilinear 2-D array operating at 5MHz. The signal processing combinations of 2-D or 3-D beamforming followed by 2-D or 3-D strain imaging are studied and compared to each other to evaluate the performance of our 3-D strain imaging system. 3-D beamforming followed by 3-D strain imaging showed best performance in all experiments.