Summary of the development of a signature for detection of residual dust from collapse of the World Trade Center buildings.

The collapse of the World Trade Center (WTC) towers on September 11, 2001, caused lower Manhattan and adjacent areas to be covered in millimeters to centimeters of dust. WTC dust penetrated into indoor spaces, and public health concerns remain regarding exposure to possible residual dust in the affected areas. The goal of the studies outlined in this review was to determine which, if any, components of the bulk WTC dust are sufficiently above typical background dust levels in New York City to develop an analytical method to screen for the component(s). Components of the <150-microm-size fraction of the dust are gypsum, phases compatible with crushed concrete, man-made vitreous fibers (MMVFs), silica, lead, chrysotile asbestos, and other materials. Slag wool was the most common WTC MMVF, whereas soda-lime glass and rock wool were minor to trace constituents. Most background samples also contained gypsum, phases compatible with concrete, and MMVF. However, the proportions of the various MMVF in background samples are typically unlike those characteristic of bulk WTC dust. Results indicate that slag wool can be used as a signature marker to identify areas that contain potential residual WTC dust contamination at concentrations that are less than average background levels for the material.