Literature DB >> 18472153

Retention of in vitro and in vivo BMP-2 bioactivities in sustained delivery vehicles for bone tissue engineering.

Diederik H R Kempen1, Lichun Lu, Teresa E Hefferan, Laura B Creemers, Avudaiappan Maran, Kelly L Classic, Wouter J A Dhert, Michael J Yaszemski.   

Abstract

In this study, we investigated the in vitro and in vivo biological activities of bone morphogenetic protein 2 (BMP-2) released from four sustained delivery vehicles for bone regeneration. BMP-2 was incorporated into (1) a gelatin hydrogel, (2) poly(lactic-co-glycolic acid) (PLGA) microspheres embedded in a gelatin hydrogel, (3) microspheres embedded in a poly(propylene fumarate) (PPF) scaffold and (4) microspheres embedded in a PPF scaffold surrounded by a gelatin hydrogel. A fraction of the incorporated BMP-2 was radiolabeled with (125)I to determine its in vitro and in vivo release profiles. The release and bioactivity of BMP-2 were tested weekly over a period of 12 weeks in preosteoblast W20-17 cell line culture and in a rat subcutaneous implantation model. Outcome parameters for in vitro and in vivo bioactivities of the released BMP-2 were alkaline phosphatase (AP) induction and bone formation, respectively. The four implant types showed different in vitro release profiles over the 12-week period, which changed significantly upon implantation. The AP induction by BMP-2 released from gelatin implants showed a loss in bioactivity after 6 weeks in culture, while the BMP-2 released from the other implants continued to show bioactivity over the full 12-week period. Micro-CT and histological analysis of the delivery vehicles after 6 weeks of implantation showed significantly more bone in the microsphere/PPF scaffold composites (Implant 3, p<0.02). After 12 weeks, the amount of newly formed bone in the microsphere/PPF scaffolds remained significantly higher than that in the gelatin and microsphere/gelatin hydrogels (p<0.001), however, there was no statistical difference compared to the microsphere/PPF/gelatin composite. Overall, the results from this study show that BMP-2 could be incorporated into various bone tissue engineering composites for sustained release over a prolonged period of time with retention of bioactivity.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18472153      PMCID: PMC2577841          DOI: 10.1016/j.biomaterials.2008.04.031

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  38 in total

1.  Characterization of rhBMP-2 pharmacokinetics implanted with biomaterial carriers in the rat ectopic model.

Authors:  H Uludag; D D'Augusta; R Palmer; G Timony; J Wozney
Journal:  J Biomed Mater Res       Date:  1999-08

2.  Biological activity of rhBMP-2 released from PLGA microspheres.

Authors:  J B Oldham; L Lu; X Zhu; B D Porter; T E Hefferan; D R Larson; B L Currier; A G Mikos; M J Yaszemski
Journal:  J Biomech Eng       Date:  2000-06       Impact factor: 2.097

Review 3.  Bone morphogenetic proteins in human bone regeneration.

Authors:  E H Groeneveld; E H Burger
Journal:  Eur J Endocrinol       Date:  2000-01       Impact factor: 6.664

4.  Controlled drug release from a novel injectable biodegradable microsphere/scaffold composite based on poly(propylene fumarate).

Authors:  Diederik H R Kempen; Lichun Lu; Choll Kim; Xun Zhu; Wouter J A Dhert; Bradford L Currier; Michael J Yaszemski
Journal:  J Biomed Mater Res A       Date:  2006-04       Impact factor: 4.396

5.  Comparison of OP-1 Putty (rhBMP-7) to iliac crest autograft for posterolateral lumbar arthrodesis: a minimum 2-year follow-up pilot study.

Authors:  Alexander R Vaccaro; D Greg Anderson; Tushar Patel; Jeffrey Fischgrund; Eeric Truumees; Harry N Herkowitz; Frank Phillips; Alan Hilibrand; Todd J Albert; Todd Wetzel; John A McCulloch
Journal:  Spine (Phila Pa 1976)       Date:  2005-12-15       Impact factor: 3.468

6.  Non-invasive screening method for simultaneous evaluation of in vivo growth factor release profiles from multiple ectopic bone tissue engineering implants.

Authors:  Diederik H R Kempen; Lichun Lu; Kelly L Classic; Theresa E Hefferan; Laura B Creemers; Avudaiappan Maran; Wouter J A Dhert; Michael J Yaszemski
Journal:  J Control Release       Date:  2008-05-13       Impact factor: 9.776

7.  Recombinant human bone morphogenetic protein-2 binding and incorporation in PLGA microsphere delivery systems.

Authors:  J A Schrier; P P DeLuca
Journal:  Pharm Dev Technol       Date:  1999       Impact factor: 3.133

8.  Controlled release of rhBMP-2 loaded poly(dl-lactic-co-glycolic acid)/calcium phosphate cement composites in vivo.

Authors:  P Q Ruhé; O C Boerman; F G M Russel; P H M Spauwen; A G Mikos; J A Jansen
Journal:  J Control Release       Date:  2005-08-18       Impact factor: 9.776

9.  Adsorption and release of insulin-like growth factor-I on porous tricalcium phosphate implant.

Authors:  P Laffargue; P Fialdes; P Frayssinet; M Rtaimate; H F Hildebrand; X Marchandise
Journal:  J Biomed Mater Res       Date:  2000-03-05

10.  Novel PCL-based honeycomb scaffolds as drug delivery systems for rhBMP-2.

Authors:  B Rai; S H Teoh; D W Hutmacher; T Cao; K H Ho
Journal:  Biomaterials       Date:  2005-06       Impact factor: 12.479

View more
  84 in total

1.  Controllable mineral coatings on PCL scaffolds as carriers for growth factor release.

Authors:  Darilis Suárez-González; Kara Barnhart; Francesco Migneco; Colleen Flanagan; Scott J Hollister; William L Murphy
Journal:  Biomaterials       Date:  2011-10-19       Impact factor: 12.479

Review 2.  Strategies for controlled delivery of growth factors and cells for bone regeneration.

Authors:  Tiffany N Vo; F Kurtis Kasper; Antonios G Mikos
Journal:  Adv Drug Deliv Rev       Date:  2012-02-04       Impact factor: 15.470

3.  Hyaluronic acid-based hydrogels functionalized with heparin that support controlled release of bioactive BMP-2.

Authors:  Gajadhar Bhakta; Bina Rai; Zophia X H Lim; James H Hui; Gary S Stein; Andre J van Wijnen; Victor Nurcombe; Glenn D Prestwich; Simon M Cool
Journal:  Biomaterials       Date:  2012-06-09       Impact factor: 12.479

Review 4.  Cell-laden hydrogels for osteochondral and cartilage tissue engineering.

Authors:  Jingzhou Yang; Yu Shrike Zhang; Kan Yue; Ali Khademhosseini
Journal:  Acta Biomater       Date:  2017-01-11       Impact factor: 8.947

5.  In Vitro and In Vivo Correlation of Bone Morphogenetic Protein-2 Release Profiles from Complex Delivery Vehicles.

Authors:  Maurits G L Olthof; Marianna A Tryfonidou; Mahrokh Dadsetan; Wouter J A Dhert; Michael J Yaszemski; Diederik H R Kempen; Lichun Lu
Journal:  Tissue Eng Part C Methods       Date:  2018-07       Impact factor: 3.056

6.  Genetic Engineering of Mesenchymal Stem Cells for Differential Matrix Deposition on 3D Woven Scaffolds.

Authors:  Nguyen P T Huynh; Jonathan M Brunger; Catherine C Gloss; Franklin T Moutos; Charles A Gersbach; Farshid Guilak
Journal:  Tissue Eng Part A       Date:  2018-07-13       Impact factor: 3.845

7.  An adhesive bone marrow scaffold and bone morphogenetic-2 protein carrier for cartilage tissue engineering.

Authors:  Jacob A Simson; Iossif A Strehin; Qiaozhi Lu; Manuel O Uy; Jennifer H Elisseeff
Journal:  Biomacromolecules       Date:  2013-02-04       Impact factor: 6.988

8.  Growth factor gradients via microsphere delivery in biopolymer scaffolds for osteochondral tissue engineering.

Authors:  Xiaoqin Wang; Esther Wenk; Xiaohui Zhang; Lorenz Meinel; Gordana Vunjak-Novakovic; David L Kaplan
Journal:  J Control Release       Date:  2008-11-17       Impact factor: 9.776

9.  Reduction of ectopic bone growth in critically-sized rat mandible defects by delivery of rhBMP-2 from kerateine biomaterials.

Authors:  Christine J Kowalczewski; Seth Tombyln; David C Wasnick; Michael R Hughes; Mary D Ellenburg; Michael F Callahan; Thomas L Smith; Mark E Van Dyke; Luke R Burnett; Justin M Saul
Journal:  Biomaterials       Date:  2014-01-15       Impact factor: 12.479

Review 10.  Drug delivery using composite scaffolds in the context of bone tissue engineering.

Authors:  Cecilia Romagnoli; Federica D'Asta; Maria Luisa Brandi
Journal:  Clin Cases Miner Bone Metab       Date:  2013-09
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.