Synthesis and bulk acoustic wave properties on the dual mode frequency shift of solidly mounted resonators.

This study focused on the fabrication and the theoretical analysis of solidly mounted resonators (SMR) concerning dual-mode frequency responses and their frequency shift of bulk acoustic wave (BAW) resonance. For this device fabrication, RF/DC magnetron sputtering and photolithography were employed to constitute the required multilayer structure. For the theoretical analysis, the dualmode frequency shift was characterized by the Sauerbrey's formula, and a modified formula was carried out following the trend for the large frequency shift. In the fabrication of the SMR device, Mo/SiO2 was chosen to construct the Bragg reflector as the high/low acoustic impedance materials, respectively, and aluminum nitride (AlN) was used as a piezoelectric layer. To investigate the characteristics of BAW on the dual-mode frequency shift, the c-axis tilted angle of AlN was altered as well as the various mass loading on the SMR. Based on the experimental results, the dual-resonance frequencies showed a nonlinear decreasing trend with a linear increase of the mass loading. Therefore, a modified formula was carried out. Furthermore, the ratio of the longitudinal-resonant frequency to the shear-resonant frequency remained at a range around 1.76 despite the various c-axis tilted angles of AlN and gradual mass loading on the SMR. The electromechanical coupling coefficient, k2(eff), of the shear resonance rose with the increase of the c-axis tilted angle of AlN.