Freeze-substitution: the addition of water to polar solvents enhances the retention of structure and acts at temperatures around -60 degrees C.

High-pressure freezing followed by freeze substitution and plastic embedding is becoming a more widely used method for TEM sample preparation. Here, we have investigated the influence of solvents, fixative concentrations and water content in the substitution medium on the sample quality of high-pressure frozen, freeze-substituted and plastic embedded mammalian cell culture monolayers. We found that the visibility of structural details was optimal with acetone and that extraction increased with both increasing and decreasing solvent polarity. Interestingly, the addition of water to polar solvents increased the sample quality, while being destructive when added to apolar solvents. The positive effect of water addition is saturable in acetone and ethanol at 5%(v/v), but even addition of up to 20% water has no negative effect on the sample structure. Therefore, a medium based on acetone containing fixatives and 5% water is most optimal for the substitution of mammalian cell cultures. In addition, our results suggest that the presence of water is critical for the retention of structure at temperatures around -60 degrees C.