Literature DB >> 18419143

Characterization of the growth of polyelectrolyte multilayers formed at interfaces between aqueous phases and thermotropic liquid crystals.

Jugal K Gupta1, Elvira Tjipto, Alexander N Zelikin, Frank Caruso, Nicholas L Abbott.   

Abstract

Polyelectrolyte multilayers (PEMs) formed at interfaces between aqueous solutions and thermotropic (water-immiscible) liquid crystals (LCs) offer the basis of a new method to tailor the nanometer-scale structure and chemical functionality of these interfaces. Toward this end, we report a study that compares the growth of PEMs formed at mobile and deformable interfaces defined by LCs relative to growth observed at model (rigid) solid surfaces. Experiments aimed at determining if polyelectrolytes such as poly(sodium-4-styrenesulfonate) (PSS) can partition from the aqueous phase into the bulk of the LC yielded no evidence of such partitioning. Whereas measurements of the growth of PEMs formed from poly(allylamine hydrochloride) (PAH) and PSS at the aqueous-LC interface revealed growth characteristics similar to those measured at both hydrophobic and hydrophilic interfaces of solids, the growth of PEMs from PAH and poly(acrylic acid) (PAA) at the aqueous-LC interface was found to differ substantially from the solids investigated: (i) the linear growth of PEMs of PAH/PAA that was measured at the aqueous-LC interface under conditions that did not lead to the growth of PEMs at the interface of octadecyltrichlorosilane (OTS)-treated glass (a hydrophobic solid surface), and (ii) in comparison to the growth of PEMs of PAH/PAA at the surface of glass (a hydrophilic charged surface), a higher rate of growth was observed at the aqueous-LC interface. The finding that the growth rate of PEMs of PAH/PAA at aqueous-LC interfaces is greater than on solid surfaces is supported by additional measurements of growth as a function of pH. Finally, the pH-triggered reorganization of PAH/PAA PEMs supported at the aqueous-LC interface led to changes in the order and optical properties of the LC. These data are discussed in light of the nature of aqueous-LC interfaces, including the mobility and deformability of the interface and recent measurements of the zeta-potentials of aqueous-LC interfaces.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18419143     DOI: 10.1021/la800013f

Source DB:  PubMed          Journal:  Langmuir        ISSN: 0743-7463            Impact factor:   3.882


  10 in total

1.  Reactive layer-by-layer assembly of suspended thin films and semipermeable membranes at interfaces created between aqueous and organic phases.

Authors:  Maren E Buck; David M Lynn
Journal:  Adv Mater       Date:  2010-03-05       Impact factor: 30.849

2.  Design of Biomolecular Interfaces using Liquid Crystals Containing Oligomeric Ethylene Glycol.

Authors:  Zhongqiang Yang; Jugal K Gupta; Kenji Kishimoto; Yoshiko Shoji; Takashi Kato; Nicholas L Abbott
Journal:  Adv Funct Mater       Date:  2010-07-09       Impact factor: 18.808

3.  Polymeric Multilayers that contain Silver Nanoparticles can be Stamped onto Biological Tissues to Provide Antibacterial Activity.

Authors:  Ankit Agarwal; Kathleen M Guthrie; Charles J Czuprynski; Michael J Schurr; Jonathan F McAnulty; Christopher J Murphy; Nicholas L Abbott
Journal:  Adv Funct Mater       Date:  2011-05-24       Impact factor: 18.808

4.  Polymeric multilayers that localize the release of chlorhexidine from biologic wound dressings.

Authors:  Ankit Agarwal; Tyler B Nelson; Patricia R Kierski; Michael J Schurr; Christopher J Murphy; Charles J Czuprynski; Jonathan F McAnulty; Nicholas L Abbott
Journal:  Biomaterials       Date:  2012-07-09       Impact factor: 12.479

5.  Spontaneous formation of water droplets at oil-solid interfaces.

Authors:  Zhongqiang Yang; Nicholas L Abbott
Journal:  Langmuir       Date:  2010-09-07       Impact factor: 3.882

6.  Reduction in wound bioburden using a silver-loaded dissolvable microfilm construct.

Authors:  Maggie Herron; Ankit Agarwal; Patricia R Kierski; Diego F Calderon; Leandro B C Teixeira; Michael J Schurr; Christopher J Murphy; Charles J Czuprynski; Jonathan F McAnulty; Nicholas L Abbott
Journal:  Adv Healthc Mater       Date:  2014-02-12       Impact factor: 9.933

7.  Principles for manipulation of the lateral organization of aqueous-soluble surface-active molecules at the liquid crystal-aqueous interface.

Authors:  Jugal K Gupta; Nicholas L Abbott
Journal:  Langmuir       Date:  2009-02-17       Impact factor: 3.882

Review 8.  Introduction to optical methods for characterizing liquid crystals at interfaces.

Authors:  Daniel S Miller; Rebecca J Carlton; Peter C Mushenheim; Nicholas L Abbott
Journal:  Langmuir       Date:  2013-02-26       Impact factor: 3.882

9.  Surfaces modified with nanometer-thick silver-impregnated polymeric films that kill bacteria but support growth of mammalian cells.

Authors:  Ankit Agarwal; Tahlia L Weis; Michael J Schurr; Nancy G Faith; Charles J Czuprynski; Jonathan F McAnulty; Christopher J Murphy; Nicholas L Abbott
Journal:  Biomaterials       Date:  2009-10-28       Impact factor: 12.479

10.  Liquid Crystalline Materials for Biological Applications.

Authors:  Aaron M Lowe; Nicholas L Abbott
Journal:  Chem Mater       Date:  2011-12-05       Impact factor: 9.811

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.