Literature DB >> 18368587

Combinatorial materials research applied to the development of new surface coatings IX: an investigation of novel antifouling/fouling-release coatings containing quaternary ammonium salt groups.

Partha Majumdar1, Elizabeth Lee, Nehal Patel, Kaley Ward, Shane J Stafslien, Justin Daniels, Bret J Chisholm, Philip Boudjouk, Maureen E Callow, James A Callow, Stephanie E M Thompson.   

Abstract

Polysiloxane coatings containing chemically-bound ("tethered") quaternary ammonium salt (QAS) moieties were investigated for potential application as environmental-friendly coatings to control marine biofouling. A combinatorial/high-throughput approach was applied to the investigation to enable multiple variables to be probed simultaneously and efficiently. The variables investigated for the moisture-curable coatings included QAS composition, ie alkyl chain length, and concentration as well as silanol-terminated polysiloxane molecular weight. A total of 75 compositionally unique coatings were prepared and characterized using surface characterization techniques and biological assays. Biological assays were based on two different marine microorganisms, a bacterium, Cellulophaga lytica and a diatom, Navicula incerta, as well as a macrofouling alga, Ulva. The results of the study showed that all three variables influenced coating surface properties as well as antifouling (AF) and fouling-release (FR) characteristics. The incorporation of QAS moieties into a polysiloxane matrix generally resulted in an increase in coating surface hydrophobicity. Characterization of coating surface morphology revealed a heterogeneous, two-phase morphology for many of the coatings investigated. A correlation was found between water contact angle and coating surface roughness, with the contact angle increasing with increasing surface roughness. Coatings based on the QAS moiety containing the longest alkyl chain (18 carbons) displayed the highest micro-roughness and, thus, the most hydrophobic surfaces. With regard to AF and FR properties, coatings based on the 18 carbon QAS moieties were very effective at inhibiting C. lytica biofilm formation and enabling easy removal of Ulva sporelings (young plants) while coatings based on the 14 carbon QAS moities were very effective at inhibiting biofilm growth of N. incerta.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18368587     DOI: 10.1080/08927010801894660

Source DB:  PubMed          Journal:  Biofouling        ISSN: 0892-7014            Impact factor:   3.209


  5 in total

Review 1.  Trends in the development of environmentally friendly fouling-resistant marine coatings.

Authors:  James A Callow; Maureen E Callow
Journal:  Nat Commun       Date:  2011       Impact factor: 14.919

2.  From broad-spectrum biocides to quorum sensing disruptors and mussel repellents: antifouling profile of alkyl triphenylphosphonium salts.

Authors:  Alberto J Martín-Rodríguez; Jose M F Babarro; Fernando Lahoz; Marta Sansón; Víctor S Martín; Manuel Norte; José J Fernández
Journal:  PLoS One       Date:  2015-04-21       Impact factor: 3.240

3.  Complete Genome Sequence of Cellulophaga lytica HI1 Using PacBio Single-Molecule Real-Time Sequencing.

Authors:  Audrey Y Asahina; Michael G Hadfield
Journal:  Genome Announc       Date:  2014-11-06

4.  Sodium Dodecyl Sulfate (SDS)-Loaded Nanoporous Polymer as Anti-Biofilm Surface Coating Material.

Authors:  Li Li; Soeren Molin; Liang Yang; Sokol Ndoni
Journal:  Int J Mol Sci       Date:  2013-02-01       Impact factor: 5.923

5.  Draft Genome Sequence of the Iridescent Marine Bacterium Cellulophaga lytica CECT 8139.

Authors:  Maylis Chapelais-Baron; Isabelle Goubet; Eric Duchaud; Eric Rosenfeld
Journal:  Genome Announc       Date:  2017-09-07
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.