Literature DB >> 18350948

Long-term clinical results of chairside Cerec CAD/CAM inlays and onlays: a case series.

Tobias Otto1, David Schneider.   

Abstract

PURPOSE: The objective of this follow-up study was to examine the performance of Cerec inlays and onlays, all of which were placed by the same clinician, in terms of clinical quality over a functional period of 15 years.
MATERIALS AND METHODS: Of 200 Cerec inlays and onlays placed consecutively in a private practice by one of the authors (TO) between 1989 and early 1991, 187 were closely monitored over a period of 15 years. All ceramic inlays and onlays had been placed chairside using the Cerec 1 method and had been luted with a bonding composite. Up to 17 years after their placement, a follow-up assessment was conducted, and the restorations were classified using modified United States Public Health Service criteria.
RESULTS: According to Kaplan-Meier analysis, the success rate of Cerec inlays and onlays was 88.7% after 17 years. A total of 21 failures (11%) were found in 17 patients. Of these failures, 76% were attributed to ceramic fractures (62%) or tooth fractures (14%). The reasons for the remaining failures were caries (19%) and endodontic problems (5%). Restorations of premolars presented a lower failure risk than those of molars.
CONCLUSION: The survival rate probability of 88.7% after up to 17 years of clinical service for Cerec computer-aided design/computer-assisted machining restorations made of Vita Mk I feldspathic ceramic is regarded as a very respectable clinical outcome.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18350948

Source DB:  PubMed          Journal:  Int J Prosthodont        ISSN: 0893-2174            Impact factor:   1.681


  11 in total

1.  [Three-year retrospective clinical evaluation of pulp-less molars with defects of varying degree repaired by cast ceramic onlays of three marginal types].

Authors:  Wei-Lin Qiang; Yu-Xuan Li; Gang Liu; Li-Hong Zhang; Jing-Yang Zhang; Wen-Jin Cao
Journal:  Hua Xi Kou Qiang Yi Xue Za Zhi       Date:  2018-10-01

2.  Polymer-infiltrated ceramic CAD/CAM inlays and partial coverage restorations: 3-year results of a prospective clinical study over 5 years.

Authors:  F A Spitznagel; K J Scholz; J R Strub; K Vach; P C Gierthmuehlen
Journal:  Clin Oral Investig       Date:  2017-12-06       Impact factor: 3.573

Review 3.  Assessment of Chair-side Computer-Aided Design and Computer-Aided Manufacturing Restorations: A Review of the Literature.

Authors:  Kusai Baroudi; Shukran Nasser Ibraheem
Journal:  J Int Oral Health       Date:  2015-04

4.  One-year clinical performance of lithium disilicate versus resin composite CAD/CAM onlays.

Authors:  Joana Souza; Mª Victoria Fuentes; Eugenia Baena; Laura Ceballos
Journal:  Odontology       Date:  2020-07-23       Impact factor: 2.634

5.  Resin Composite Materials for Chairside CAD/CAM Restorations: A Comparison of Selected Mechanical Properties.

Authors:  Wojciech Grzebieluch; Marcin Mikulewicz; Urszula Kaczmarek
Journal:  J Healthc Eng       Date:  2021-04-28       Impact factor: 2.682

6.  Evaluation of the Bond Strength of Densely Sintered Ceramics Subjected to Extended Firing.

Authors:  Samuel Oliveira Costa; Suellen Nogueira Linares Lima; Maria Victória Nassif; Andres Felipe Millan Cardenas; Rudys Rodolfo de Jesus Tavarez; Darlon Martins Lima; Matheus Coelho Bandeca
Journal:  Clin Cosmet Investig Dent       Date:  2021-09-01

7.  Comparison of digital and conventional impression techniques: evaluation of patients' perception, treatment comfort, effectiveness and clinical outcomes.

Authors:  Emir Yuzbasioglu; Hanefi Kurt; Rana Turunc; Halenur Bilir
Journal:  BMC Oral Health       Date:  2014-01-30       Impact factor: 2.757

8.  Chairside Fabrication of an All-Ceramic Partial Crown Using a Zirconia-Reinforced Lithium Silicate Ceramic.

Authors:  Sven Rinke; Anne-Kathrin Pabel; Matthias Rödiger; Dirk Ziebolz
Journal:  Case Rep Dent       Date:  2016-03-06

Review 9.  A systematic review of outcome measurements and quality of studies evaluating fixed tooth-supported restorations.

Authors:  Devangkumar Rajnikant Patel; Tim O'Brien; Aviva Petrie; Haralampos Petridis
Journal:  J Prosthodont       Date:  2014-06-19       Impact factor: 2.752

Review 10.  Review on Polymer, Ceramic and Composite Materials for CAD/CAM Indirect Restorations in Dentistry-Application, Mechanical Characteristics and Comparison.

Authors:  Aleksandra Skorulska; Paweł Piszko; Zbigniew Rybak; Maria Szymonowicz; Maciej Dobrzyński
Journal:  Materials (Basel)       Date:  2021-03-24       Impact factor: 3.623

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.